27-07-2016 De norm NEN-EN-ISO 14122-3: Veiligheid van machines - Permanente toegangsmiddelen tot machines - Deel 3: Trappen, ladders en leuningen is herzien en onlangs gepubliceerd.
Deze norm is vooralsnog alleen in het Engels beschikbaar:
NEN-EN-ISO 14122-3 gives requirements for non-powered stairs, stepladders and guard-rails which are a part of a stationary machine, and to the non-powered adjustable parts (e.g. foldable, slidable) and movable parts of those fixed means of access.
This part of ISO 14122 specifies minimum requirements that also apply when the same means of access is required as the part of the building or civil construction (e.g. stairs, stepladders, guard-rails) where the machine is installed, on condition that the main function of that part of the construction is to provide a means of access to the machine.
It is intended that this part of ISO 14122 be used with ISO 14122-1 to give the requirements for steps, stepladders and guard-rails. The ISO 14122 series as a whole is applicable to both stationary and mobile machinery where fixed means of access are necessary.
It is not applicable to powered means of access such as lifts, escalators, or other devices specially designed to lift persons between two levels. This part of ISO 14122 is not applicable to machinery manufactured before the date of its publication.
Normen voor het lassen van metalen
Veiligheid van machines - Algemene ontwerpbeginselen - Risicobeoordeli...
Veiligheid van machines - Permanente toegangsmiddelen tot machines - D...
Veiligheid van machines - Veiligheidsgerelateerde delen van besturings...
Voor meer informatie neem contact met ons op:
(015) 2 690 180