ASME-BPVC 8-2:2004 en

Alternative Rules

  • Deze norm is ingetrokken sinds 31-07-2007


Over deze norm

Status Ingetrokken
Aantal pagina's 0
Commissie Drukapparatuur
Gepubliceerd op 01-07-2004
Taal Engels
This Division of Section VIII provides requirements applicable to the design, fabrication, inspection, testing, and certification of pressure vessels operating at either internal or external pressures exceeding 15 psig. Such vessels may be fired or unfired. This pressure may be obtained from an external source or by the application of heat from a direct or indirect source, or any combination thereof. These rules provide an alternative to the minimum requirements for pressure vessels under Division 1 rules. In comparison the Division 1, Division 2 requirements on materials, design, and nondestructive examination are more rigorous; however, higher design stress intensity values are permitted. Division 2 rules cover only vessels to be installed in a fixed location for a specific service where operation and maintenance control is retained during the useful life of the vessel by the user who prepares or causes to be prepared the design specifications. These rules may also apply to human occupancy pressure vessels typically in the diving industry. Rules pertaining to the use of the U2 and UV Code symbol stamps are also included. General Requirements; Material Requirements; Design Requirements; Fabrication Requirements; Pressure Relief Devices; Inspection in Radiography; Testing; Marking; Stamping; Reports & Records.


ICS-code 23.020.30
Nederlandse titel Alternative Rules
Engelse titel Alternative Rules
Vervangen door



Ga naar winkelwagen