Norm

ASTM A204/A204M - 12 en

Standard Specification for Pressure Vessel Plates, Alloy Steel, Molybdenum

  • Deze norm is ingetrokken sinds 01-11-2017

45,11 54,58 Incl BTW

Over deze norm

Status Ingetrokken
Aantal pagina's 3
Gepubliceerd op 01-05-2012
Taal Engels

1.1 This specification covers molybdenum-alloy steel plates, intended particularly for welded boilers and other pressure vessels.

1.2 Plates under this specification are available in three grades having different strength levels as follows:

Grade Tensile Strength, ksi [MPa]
A 6585 [450585]
B 7090 [485620]
C 7595 [515655]

1.3 The maximum thickness of plates is limited only by the capacity of the composition to meet the specified mechanical property requirements; however, current practice normally limits the maximum thickness of plates furnished under this specification as follows:

Grade Maximum Thickness, in. [mm]
A 6 [150]
B 6 [150]
C 4 [100]

1.4 The values stated in either inch-pound units or SI units are to be regarded separately as standard. Within the text, the SI units are shown in brackets. The values stated in each system are not exact equivalents; therefore, each system must be used independently of the other. Combining values from the two systems may result in nonconformance with this specification.

Details

ICS-code 77.140.30
Engelse titel Standard Specification for Pressure Vessel Plates, Alloy Steel, Molybdenum
Vervangt
Vervangen door

Winkelwagen

Subtotaal:

Ga naar winkelwagen