Norm

ASTM A421/A421M-15

Standard Specification for Stress-Relieved Steel Wire for Prestressed Concrete

48,24

Over deze norm

Status Definitief
Aantal pagina's 4
Commissie A01.05
Gepubliceerd op 01-11-2015
Taal Engels

1.1 This specification covers two types of stress-relieved round high-carbon steel wire commonly used in prestressed concrete construction, as follows:

1.1.1 Type BA wire is used for applications in which cold-end deformation is used for anchoring purposes (Button Anchorage), and

1.1.2 Type WA wire is used for application in which the ends are anchored by wedges, and no cold-end deformation of the wire is involved (Wedge Anchorage).

1.2 A supplementary requirement (S1) is provided for use where low-relaxation wire and relaxation testing for that product is required by the purchaser. The supplementary requirement applies only when specified in the purchase order.

1.3 This specification is applicable for orders in either inch-pounds units (as Specification A421) or in SI units (as Specification A421M).

1.4 The values stated in either inch-pound or SI units are to be regarded separately as standard. Within the text, the SI units are shown in brackets. The values stated in each system may not be exact equivalents; therefore, each system shall be used independently of the other. Combining values from the two systems may result in non-conformance with the specification.

Details

ICS-code 77.140.15
77.140.65
Nederlandse titel Standard Specification for Stress-Relieved Steel Wire for Prestressed Concrete
Engelse titel Standard Specification for Stress-Relieved Steel Wire for Prestressed Concrete

Winkelwagen

Subtotaal:

Ga naar winkelwagen