Norm

ASTM A529/A529M-14

Standard Specification for High-Strength Carbon-Manganese Steel of Structural Quality

48,24

Over deze norm

Status Definitief
Aantal pagina's 3
Commissie A01.02
Gepubliceerd op 01-10-2014
Taal Engels

1.1 This specification covers carbon-manganese steel shapes, plates, and bars of structural quality for use in riveted, bolted, or welded construction of buildings and for general structural purposes.

1.2 Material under this specification is available in two grades:

Grade

Yield Strength,
ksi [MPa]

Thickness

50 [345]

50 [345]

Plates to 1 in. [25 mm] thick
to 15 in. [380 mm] wide

 

 

Bars to 31/2 in. [90 mm]

 

 

Shapes with flange or leg thickness to
11/2 in. [40 mm] inclusive

55 [380]

55 [380]

Plates to 1 in. [25 mm] thick
to 15 in. [380 mm] wide

 

 

Bars to 3 in. [75 mm]

 

 

Shapes with flange or leg thickness to
11/2 in. [40 mm] inclusive

1.3 When the steel is to be welded, it is presupposed that a welding procedure suitable for the grade of steel and intended use or service will be utilized. See Appendix X3 of Specification A6/A6M for information on weldability.

1.4 The values stated in either inch-pound units or SI units are to be regarded as standard. Within the text, the SI units are shown in brackets. The values stated in each system are not exact equivalents; therefore, each system must be used independently of the other.

Details

ICS-code 77.140.10
Nederlandse titel Standard Specification for High-Strength Carbon-Manganese Steel of Structural Quality
Engelse titel Standard Specification for High-Strength Carbon-Manganese Steel of Structural Quality

Winkelwagen

Subtotaal:

Ga naar winkelwagen