Norm

ASTM A744/A744M-13

Standard Specification for Castings, Iron-Chromium-Nickel, Corrosion Resistant, for Severe Service

54,27

Over deze norm

Status Definitief
Aantal pagina's 6
Commissie A01.18
Gepubliceerd op 15-05-2013
Taal Engels

1.1 This specification covers iron-chromium-nickel alloy, stainless steel castings intended for particularly severe corrosive applications.

1.2 This specification requires postweld heat-treatment of all weld repairs affecting surfaces intended to be wetted by the corrosive medium. For applications for which postweld heat-treatment is not considered mandatory for retention of acceptable corrosion resistance, refer to Specification A743/A743M.

Note 1For general corrosion-resistant alloy castings, reference should be made to Specification A743/A743M. For general heat-resistant alloy castings, reference should be made to Specification A297/A297M. For nickel-base alloy castings, refer to Specification A494/A494M.

1.3 The values stated in either SI units or inch-pound units are to be regarded separately as standard. The values stated in each system may not be exact equivalents; therefore, each system shall be used independently of the other. Combining values from the two systems may result in non-conformance with the standard.

1.3.1 Within the text, the SI units are shown in brackets.

1.3.2 Inch-pound units are applicable for material ordered to Specification A744 and SI units for material ordered to Specification A744M.

Details

ICS-code 77.140.80
Nederlandse titel Standard Specification for Castings, Iron-Chromium-Nickel, Corrosion Resistant, for Severe Service
Engelse titel Standard Specification for Castings, Iron-Chromium-Nickel, Corrosion Resistant, for Severe Service

Winkelwagen

Subtotaal:

Ga naar winkelwagen