Norm

ASTM A861-04(2013)

Standard Specification for High-Silicon Iron Pipe and Fittings

78,39

Over deze norm

Status Definitief
Aantal pagina's 26
Commissie A04.12
Gepubliceerd op 01-05-2013
Taal Engels

1.1 This specification covers high-silicon iron pipe and pipe fittings intended for corrosion-resistant service for both above- and below-grade construction.

1.2 The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard.

1.3 Pipe and pipe fittings shall be the no-hub (MJ) or the hub and plain end design.

1.4 Pipe and pipe fittings shall be of the sizes specified in Table 1 and Table 2 and Figs. 1-71 or other sizes that shall be permitted to conform to the requirements given herein.

TABLE 1 Tolerances for High-Silicon Iron Hub/Plain-End Pipe
Note 11 in. = 25.4 mm.

Size, in.

Wall Thickness, in.

ID Tolerance, in.

OD Tolerance, in.

 2

±1/32 

±1/32 

±1/32 

 3

±1/32 

±1/32 

±1/32 

 4

±1/32 

±1/32 

±1/32 

 6

±1/32 

±1/32 

±3/64 

 8

±1/32 

±1/8  

±1/8  

10

±1/8  

±1/8  

±1/8  

12

±1/8  

±1/8  

±1/8  

15

±1/8  

±1/8  

±1/8  


TABLE 2 Tolerances for High-Silicon Iron Fittings
Note 11 in. = 25.4 mm.

Size, in.

ID Tolerance,
in.

OD Tolerance,
in.

Stop Lug Depth
Tolerance, in.

   11/2 

±1/16 

±1/16 

±1/16 

   11/2 × 11/2 

±1/16 

±1/16 

±1/16 

   2

±1/16 

±1/16 

±1/16 

   2 × 11/2 

±1/16 

±1/16 

±1/16 

   2 × 2

±1/16 

±1/16 

±1/16 

   3

±1/16 

±1/16 

±1/16 

   3 × 11/2 

±1/16 

±1/16 

±1/16 

   3 × 2

±1/16 

±1/16 

±1/16 

   3 × 3

±1/16 

±1/16 

±1/16 

   4

±1/16 

±1/16 

±1/16 

   4 × 11/2 

±1/16 

±1/16 

±1/16 

   4 × 2

±1/16 

±1/16 

±1/16 

   4 × 3

±1/16 

±1/16 

±1/16 

   4 × 4

±1/16 

±1/16 

±1/16 


TABLE 3 Chemical Composition

Element

Composition, Weight %

Grade 1

Grade 2

Carbon

 0.65–1.10

 0.75–1.15

Manganese

 1.50 max

 1.50 max

Silicon

14.20–14.75

14.20–14.75

Chromium

 0.50 max

 3.25–5.00

Molybdenum

 0.50 max

 0.40-0.60

Copper

 0.50 max

 0.50 max


No-Hub Pipe (MJ)

Size, in.

J, in.

F, in.

t, in.

11/2 

23/16 (2.19)

84

5/16 

211/16 (2.69)

84

5/16 

349/64 (3.77)

84

5/16 

449/64 (4.77)

84

5/16 


Note 11 in. = 25.4 mm.
FIG. 1 No-Hub Pipe (MJ)
Quarter Bends

Size, in.

D, in.

ID, in.

OD, in.

Stop Lug
Depth (P), in.

11/2 

41/4 

11/2 

23/16 (2.19)

11/32 

2

41/2 

2

25/8 (2.62)

11/32 

2 × 11/2 

43/16 × 41/2 

2 × 11/2 

25/8 × 23/16 

11/32 

3

5

3

33/4 (3.75)

11/32 

4

51/2 

4

43/4 (4.75)

11/32 


Note 11 in. = 25.4 mm.
FIG. 2 Quarter Bends
Sixth Bends

Size, in.

D, in.  

ID, in.  

OD, in.

Stop Lug
Depth (P), in.

   11/2 

   3

   11/2 

   23/16 

11/32 

   2

   31/4 

   2

   25/8 

11/32 

   3

   31/2 

   3

   33/4 

11/32 

   4

   33/4 

   4

   43/4 

11/32 


Note 11 in. = 25.4 mm.
FIG. 3 Sixth Bends
Return Bends

 Size,
 in.

 C,
 in.

D,
in.

 F,
 in.

R,
in.

ID,
in.

OD,
in.

Stop Lug Depth (P), in.

  11/2 
  2

 4
 43/4 

2
2

 53/32 
 511/16 

2
23/8 

11/2 
2

  23/16 
  25/8 

11/32 
11/32 


Note 11 in. = 25.4 mm.
FIG. 4 Return Bends
Double-Branch Quarter Bend

Size,
in.

D,
in.

E,
in.

ID,
in.

OD,
in.

Stop Lug Depth (P), in.

11/2 

37/8 

33/4 

11/2 

23/16 

11/32 


Note 11 in. = 25.4 mm.
FIG. 5 Double-Branch Quarter Bend
Eight Bends

  Size,
  in.

  D,
  in.

  ID,
  in.

  OD,
  in.

Stop Lug Depth (P), in.

  11/2 

  21/2 

  11/2 

  23/16 

11/32 

  2

  23/4 

  2

  25/8 

11/32 

  3

  3

  3

  33/4 

11/32 

  4

  31/4 

  4

  43/4 

11/32 


Note 11 in. = 25.4 mm.
FIG. 6 Eight Bends
Sixteenth Bends

  Size,
  in.

  D,
  in.

  ID,
  in.

  OD,
  in.

Stop Lug Depth (P), in.

  11/2 

  2

  11/2 

  23/16 

11/32 

  2

  21/8 

  2

  25/8 

11/32 

  3

  21/4 

  3

  33/4 

11/32 

  4

  23/8 

  4

  43/4 

11/32 


Note 11 in. = 25.4 mm.
FIG. 7 Sixteenth Bends
Long-Sweep Quarter Bends
FIG. 8 Long-Sweep Quarter Bends
Sanitary Y Branches

Size,
in.

D,
in.

F,
in.

G,
in.

 ID,
 in

OD,
in.

Stop Lug Depth (P), in.

1/2 × 11/2 

45/8 

 61/2 

17/8 

11/2 × 11/2 

23/16 × 23/16 

11/32 

2 × 11/2 

47/8 

 61/2 

15/8 

2 × 11/2 

25/8 × 23/16 

11/32 

2 × 2

45/8 

 63/8 

2

2 × 2

25/8 × 25/8 

11/32 

3 × 11/2 

55/8 

 61/2 

11/4 

3 × 11/2 

33/4 × 23/16 

11/32 

3 × 2

57/8 

 71/8 

11/2 

3 × 2

33/4 × 25/8 

11/32 

3 × 3

63/8 

 85/8 

21/4 

3 × 3

33/4 × 33/4 

11/32 

4 × 11/2 

65/8 

 71/2 

13/8 

4 × 11/2 

43/4 × 23/16 

11/32 

4 × 2

65/8 

 71/2 

13/8 

4 × 2

43/4 × 25/8 

11/32 

4 × 3

71/8 

 83/4 

13/4 

4 × 3

43/4 × 33/4 

11/32 

4 × 4

75/8 

101/4 

25/8 

4 × 4

43/4 × 43/4 

11/32 


Note 11 in. = 25.4 mm.
FIG. 9 Sanitary Y Branches
Double-Branch Sanitary Y

Size, 

D,

F,

G,

ID,  

OD,

Stop Lug

in. 

in.

in.

in.

in.   

in.

Depth (P), in.

11/2 × 11/2 

45/8 

61/2 

17/8 

11/2 × 11/2 

23/16 × 23/16 

11/32 

2 × 11/2 

47/8 

61/2 

15/8 

2 × 11/2 

25/8 × 23/16 

11/32 

2 × 2

45/8 

63/8 

2

2 × 2

25/8 × 25/8 

11/32 

3 × 11/2 

55/8 

61/2 

11/4 

3 × 11/2 

33/4 × 23/16 

11/32 

3 × 2

57/8 

71/8 

11/2 

3 × 2

33/4 × 25/8 

11/32 

3 × 3

63/8 

85/8 

21/4 

3 × 3

33/4 × 33/4 

11/32 

4 × 2

65/8 

71/2 

13/8 

4 × 2

43/4 × 25/8 

11/32 

4 × 3

71/8 

83/4 

13/4 

4 × 3

43/4 × 33/4 

11/32 

4 × 4

75/8 

101/4 

25/8 

4 × 4

43/4 × 43/4 

11/32 


Note 11 in. = 25.4 mm.
FIG. 10 Double-Branch Sanitary Y
Sanitary Combination Y and Bend

Size,
in.

D,
in.

E,
in.

F,
in.

G,
in.

ID,
in.

OD,
in.

Stop Lug
Depth
(P), in.

11/2 × 11/2 

  43/4 

53/8 

 61/2 

17/8 

  1/2 × 11/2 

23/16 × 23/16 

11/32 

2 × 11/2 

  43/4 

53/4 

 61/2 

15/8 

  2 × 11/2 

25/8 × 23/16 

11/32 

2 × 2

  5

57/8 

 65/8 

17/8 

  2 × 2

25/8 × 25/8 

11/32 

3 × 11/2 

  4

51/4 

 61/2 

15/8 

  3 × 11/2 

33/4 × 23/16 

11/32 

3 × 2

  5

61/4 

 71/8 

11/2 

  3 × 2

33/4  × 25/8 

11/32 

3 × 3

  61/4 

7

 81/2 

21/4 

  3 × 3

33/4 × 33/4 

11/32 

4 × 11/2 

  45/16 

61/8 

 65/8 

13/8 

  4 × 11/2 

43/4 × 23/16 

11/32 

4 × 2

  5

63/8 

 73/8 

13/8 

  4 × 2

43/4 × 25/8 

11/32 

4 × 3

  6

71/4 

 83/4 

13/4 

  4× 3

43/4 × 33/4 

11/32 

4 × 4

  73/8 

101/4 

25/8 

  4× 4

43/4 × 43/4 

11/32 


Note 11 in. = 25.4 mm.
FIG. 11 Sanitary Combination Y and 1/8  Bend
Double-Branch Sanitary Combination Y and Bend

Size,
in.

D,
in.

E,
in.

F,
in.

G,
in.

ID,
in.

OD,
in.

Stop Lug
Depth
(P), in.

11/2 × 11/2 

 43/4 

 53/8 

 61/2 

77/8 

11/2 × 11/2 

23/16 × 23/16 

11/32 

2 × 11/2 

 43/4 

 53/4 

 61/2 

15/8 

2 × 11/2 

25/8 × 23/16 

11/32 

2 × 2

 5

 57/8 

 65/8 

15/8 

2 × 2

25/8 × 25/8 

11/32 

3 × 11/2 

 41/4 

 51/4 

 61/2 

15/8 

3 × 11/2 

33/4 × 23/16 

11/32 

3 × 2

 5

 61/4 

 71/8 

11/2 

3 × 2

33/4 × 25/8 

11/32 

3 × 3

 61/4 

 7

 81/2 

21/4 

3 × 3

33/4 × 33/4 

11/32 

4 × 2

 5

 63/8 

 73/8 

13/8 

4 × 2

43/4 × 25/8 

11/32 

4 × 3

 6

 71/4 

 83/4 

13/4 

4 × 3

43/4 × 33/4 

11/32 

4 × 4

 73/8 

  8

101/4 

25/8 

4 × 4

43/4 × 43/4 

11/32 


Note 11 in. = 25.4 mm.
FIG. 12 Double-Branch Sanitary Combination Y and 1/8 Bend
Sanitary T Branches

Size, in.

E, in.

F, in.

G, in.

ID, in.

OD, in.

Stop Lug
Depth (P), in.

11/2 × 11/2 

41/4 

63/4 

41/4 

   11/2 × 11/2 

  23/16 × 23/16 

11/32 

2 × 11/2 

41/2 

63/4 

41/4 

   2 × 11/2 

  25/8 × 23/16 

11/32 

2 × 11/2 × 11/2 

41/2 

63/4 

41/4 

   2 × 11/2 × 11/2 

  25/8 × 23/16 × 23/16 

11/32 

2 × 2

41/2 

67/8 

41/2 

   2 × 2

  2 5/8 × 25/8 

11/32 

3 × 11/2 

63/4 

41/4 

   3 × 11/2 

  33/4 × 23/16 

11/32 

3 × 2

71/4 

41/2 

   3 × 2

  33/4 × 2 5/8 

11/32 

3 × 3

83/8 

5  

   3× 3

  33/4 × 33/4 

11/32 

4 × 11/2 

59/16 

67/8 

 47/32 

   4× 11/2 

  43/4 × 23/16 

11/32 

4 × 2

51/2 

71/4 

41/2 

   4 × 2

  43/4 × 25/8 

11/32 

4 × 3

51/2 

81/4 

5  

   4 × 3

  43/4 × 33/4 

11/32 

4 × 4

51/2 

93/8 

51/2 

   4 × 4

  43/4 × 43/4 

11/32 


Note 11 in. = 25.4 mm.
FIG. 13 Sanitary T Branches
Double-Branch Sanitary T

Size,
in.

E,
in.

F,
in.

G,
in.

ID,
in.

OD,
in.

Stop Lug
Depth (P), in.

 11/2 × 11/2 

41/4 

63/4 

41/4 

 11/2 × 11/2 

  23/16 × 23/16 

11/32 

 2 × 11/2 

41/2 

63/4 

41/4 

 2 × 11/2 

  25/8 × 23/16 

11/32 

 2 × 2

41/2 

67/8 

41/2 

 2 × 2

  25/8 × 25/8 

11/32 

 3 × 11/2 

5

63/4 

41/4 

 3 ×11/2 

  33/4 × 23/16 

11/32 

 3 × 2

5

71/4 

41/2 

 3 × 2

  33/4 × 25/8 

11/32 

 3 × 3

5

83/8 

5

 3 × 3

  33/4 × 33/4 

11/32 

 4 × 2

51/2 

71/4 

41/2 

 4 × 2

  43/8 × 25/8 

11/32 

 4 × 3

51/2 

81/4 

5

 4 × 3

  43/4 × 33/4 

11/32 

 4 × 4

51/2 

93/8 

51/2 

 4 × 4

  43/8 × 43/8 

11/32 


Note 11 in. = 25.4 mm.
FIG. 14 Double-Branch Sanitary T
Sanitary Running Traps

Size,
in.

A,
in.

B,
in.

C,
in.

D,
in.

J,
in.

R,
in.

ID,
in.

OD,
in.

Stop Lug
Depth (P), in.

  11/2 

  23/4 

   15/8 

  5

10

  4

  13/4 

  11/2 

 23/16 

  11/32 

  2

  31/2 

   115/16 

  51/2 

11

  4

  2

  2

 25/8 

  11/32 

  3

  4

   25/16 

  61/2 

13

  51/2 

  21/2 

  3

 33/4 

  11/32 

  4

  41/2 

   3

  71/2 

15

  61/2 

  3

  4

 43/4 

  11/32 


Note 11 in. = 25.4 mm.
FIG. 15 Sanitary Running Traps
Sanitary P Traps

  Size,
  in.

  A,
  in.

  B,
  in.

  C,
  in.

  D,
  in.

  J,
  in.

  R,
  in.

  ID,
  in.

  OD,
  in.

Stop Lug Depth (P), in.

  11/2 

  33/4 

 15/8 

  31/2 

  63/4 

  4

   13/4 

  11/2 

 23/16 

  11/32 

  2

  4

 115/16 

  4

  71/2 

  4

   2

  2

 25/8 

  11/32 

  3

  41/2 

 25/16 

  5

  9

  51/2 

   21/2 

  3

 33/4 

  11/32 

  4

  5

 3

  6

  101/2 

  61/2 

   3

  4

 43/4 

  11/32 


Note 11 in. = 25.4 mm.
FIG. 16 Sanitary P Traps
Swivel Trap P-Style Short

  Size,
  in.

  C,
  in.

  D,
  in.

  E,
  in.

  F,
  in.

  G,
  in.

  H,
  in.

  ID,
  in.

  OD,
  in.

Stop Lug Depth (P), in.

  11/2 
  2

  83/4 
  93/4 

  4
  41/2 

 615/16 
 73/4 

  57/16 
  53/4 

  13/32 
  13/8 

  121/2 
  12

  11/2 
  2

  23/16 
  25/8 

11/32 
11/32 


Note 11 in. = 25.4 mm.
FIG. 17 Swivel Trap P-Style Short
Swivel Trap P-Style Long

Size,
in.

CA,
in.

D,
in.

E,
in.

F,
in.

G,
in.

HA,
in.

ID,
in.

OD,
in.

Stop Lug Depth (P), in.

11/2 

123/4 

4

615/16 

57/16 

13/32 

121/2 

11/2 

23/16 

11/32 




A For shorter C or H dimension, snap-cut to desired length.
Note 11 in. = 25.4 mm.
FIG. 18 Swivel Trap P-Style Long
Swivel Type-S Style Long

  Size,
  in.

  C,
  in.

  F,
  in.

  G,
  in.

  H,
  in.

  ID,
  in.

  OD,
  in.

Stop Lug Depth (P), in.

   11/2 
   2

  6
  63/8 

  8
  101/2 

  143/8 
  12

  223/4 
  175/8 

  11/2 
  2

  23/16 
  25/8 

11/32 
11/32 


Note 11 in. = 25.4 mm.
FIG. 19 Swivel Type-S Style Long
Centrifugal Drum Trap P Swivel Type
FIG. 20 Centrifugal Drum Trap P Swivel Type
Centrifugal Drum Trap S Swivel Type

  Size,
  in.

  C,
  in.

  D,
  in.

  E,
  in.

  F,
  in.

  J,
  in.

  ID,
  in.

  OD,
  in.

Stop Lug Depth (P), in.

   11/2 

  4

  53/32 

  63/4 

  123/4 

  4

  11/2 

  11/8 

11/32 

   11/2 

  4

  1515/32 

  63/4 

  123/4 

  4

  11/2 

  11/8 

11/32 

   2

  43/4 

  511/16 

  79/16 

  141/4 

  43/4 

  2

  2

11/32 


Note 11 in. = 25.4 mm.
FIG. 21 Centrifugal Drum Trap S Swivel Type
Combination Cleanout and Test Tees

Size, in.

B,
in.

E,
in.

F,
in.

G,
in.

2

     27/16 

    33/4 

    67/8 

     37/16 

3

     33/8 

    411/16 

    83/8 

     43/16 

4

     37/8 

    57/16 

    93/8 

     411/16 


Note 11 in. = 25.4 mm.
FIG. 22 Combination Cleanout and Test Tees
Coupling

Size, in.

A, in.

B, in.

 11/2 

   33/8 

   27/8 

2

   4

   33/8 

3

   47/16 

   43/16 

4

   415/16 

   53/16 


Note 11 in. = 25.4 mm.
FIG. 23 Coupling
Pipe Plugs

Size, in.

F, in.

1/2 

2

21/2 

3

21/2 

4

21/2 


Note 11 in. = 25.4 mm.
FIG. 24 Pipe Plugs
Cleanout Plugs

Size, in.

A, in.

D, in.

E, in.

F, in.

   11/2 

23/16 

21/4 

15/16 

39/16 

   2

221/32 

21/4 

15/16 

39/16 

   3

33/4 

21/2 

13/8 

37/8 

   4

43/4 

23/4 

17/16 

43/16 


Note 11 in. = 25.4 mm.
FIG. 25 Cleanout Plugs
Adapter/Hub to No-Hub

Size, in.   

A, in.

B, in.

E, in.

F, in.

11/2 × 11/2 

323/32 

21/4 

9/16 

45/8 

11/2 × 2

313/16 

221/32 

9/16 

45/8 

11/2 × 3

313/16 

313/16 

9/16 

45/8 

11/2 × 4

313/16 

413/16 

9/16 

47/8 

2 × 2

45/16 

223/32 

5/8 

51/8 

2 × 3

45/16 

313/16 

5/8 

43/4 

2 × 4

45/16 

413/16 

5/8 

5

3 × 3

55/16 

313/16 

11/16 

53/8 

4 × 4

69/32 

47/8 

11/16 

59/16 


Note 11 in. = 25.4 mm.
FIG. 26 Adapter/Hub to No-Hub
Reducers-Increasers

Size, in.

B, in.

F, in.

    2 × 11/2 

11/2 

8

    3 × 11/2 

11/2 

8

    3 × 2

11/2 

8

    4 × 11/2 

11/2 

8

    4 × 2

11/2 

8

    4 × 3

11/2 

8


Note 11 in. = 25.4 mm.
FIG. 27 Reducers-Increasers
Sink Outlet

Size, in.

A, in.

B, in.

C, in.

D, in.

E, in.

F, in.

11/2 

0 to 2

101/4 

17/8 

35/16 

1/4 

23/16 


Note 11 in. = 25.4 mm.
FIG. 28 Sink Outlet
Sink Overflows

A, in.A

B, in.A

C, in.

4

 61/8 

1

6

 81/8 

1

8

101/8 

1




A Dimension A and B will vary depending upon the sink strainer in which overflow is placed, depth of counterbore, and so forth, Dimension B is given only as a guide.
Note 11 in. = 25.4 mm.
FIG. 29 Sink Overflows
Threaded Adapters

Type

Size, in.

AD-7

   11/2 Outlet to 11/2 MJ

AD-8

   11/2 Outlet to 2 MJ

AD-10

   2 Outlet to 2 MJ


Note 11 in. = 25.4 mm.
FIG. 30 Threaded Adapters
Trap Cleanout Details
Note 11 in. = 25.4 mm.
FIG. 31 Trap Cleanout Details
Adapter—No-Hub and Split Flange

Size, in.

A, in.

J, in.

2

53/4 

3

71/2 

4

8


Note 1Flange dimensions are 150 lb ANSI standard.
Note 21 in. = 25.4 mm.
FIG. 32 Adapter—No-Hub and Split Flange
MJ to Lead Adapter

Type 

Size, in.

B, in.

C, in.

D, in.

  AD-11
  AD-12

  11/2 
  2

21/4 
223/32 

11/2 
11/2 

   125/32 
   29/32 


Note 11 in. = 25.4 mm.
FIG. 33 MJ to Lead Adapter
Floor Drains
Note 11 in. = 25.4 mm.
FIG. 34 Floor Drains
Hub and Plain End Pipe

Size, in.

A, in.

B, in.

C, in.

D, in.

E, in.

F, in.

   2

 49/16 

  43/16 

  35/16 

  21/32 

  211/16 

  25/8 

   3

 55/16 

  53/16 

  45/16 

  31/8 

  325/32 

  25/8 

   4

 63/8 

  63/16 

  55/16 

  41/8 

  425/32 

  25/8 

   6

 817/32 

  811/32 

  75/16 

  515/16 

  611/16 

  3

   8

 111/4 

  103/4 

  95/8 

  81/4 

  9

  3

  10

 141/4 

  133/4 

  121/4 

  10

  111/4 

  37/8 

  12

 163/4 

  16

  141/2 

  12

  131/4 

  4

  15

 201/4 

  193/4 

  173/4 

  15

  163/4 

  41/8 


Size, in.

t, in.

Weight, lb

Working
Length, ft

Overall Length

 2

5/16 

0.31

7

  7 ft 25/8 in.

 3

5/16 

0.31

7

  7 ft 25/8 in.

 4

5/16 

0.31

7

  7 ft 25/8 in.

 6

13/32 

0.40

7

  7 ft 3 in.

 8

13/32 

0.40

7

  7 ft 3 in.

10

5/8 

0.62

7

  7 ft 37/8 in.

12

5/8 

0.62

5

  5 ft 4 in.

15

7/8 

0.75

5

  5 ft 41/8 in.


Note 11 in. = 25.4 mm.
FIG. 35 Hub and Plain End Pipe
Straight Tees

Size, in.

Weight,
lb

A, in.

B, in.

C, in.

  2 × 11/2 

    11

  81/2 

  17/8 

   65/8 

  2 × 2

    12

  9

  2

   7

  3 × 2

    17

  9

  21/2 

   613/16 

  3 × 3

    19

  10

  21/2 

   71/2 

  4 × 2

    20

  9

  3

   7

  4 × 3

    221/2 

  10

  3

   71/4 

  4 × 4

    26

  11

  3

   8


Note 11 in. = 25.4 mm.
FIG. 36 Straight Tees
Sanitary T Branches

Size, in.

Weight, lb

A, in.

B, in.

C, in.

  2 × 11/2 

  11

81/2 

31/2 

63/4 

   2 × 2

  12

9

31/2 

7

   3 × 11/2 

  16

81/2 

4

63/4 

   3 × 2

  18

9

4

7

   3 × 3

  20

10

4

71/2 

   4 × 11/2 

  18

81/2 

41/2 

63/4 

   4 × 2

  19

9

41/2 

7

   4 × 3

  26

10

41/2 

71/2 

   4 × 4

  28

11

41/2 

8

   6 × 2

  31

9

51/2 

7

   6 × 3

  33

10

51/2 

71/2 

   6 × 4

  35

11

51/2 

8

   6 × 6

  50

13

51/2 

9

   8 × 4

  62

105/8 

61/4 

8

   8 × 6

  65

141/2 

65/8 

101/2 

   8 × 8

 113

19

65/8 

131/2 

  10 × 6

 130

141/4 

75/8 

101/2 

  10 × 10

 180

21

73/4 

141/2 

  12 × 8

 187

19

83/4 

131/2 


Note 11 in. = 25.4 mm.
FIG. 37 Sanitary T Branches
Sanitary Y Branches

Size, in.

Weight, lb 

A, in.

B, in.

C, in.

   2 × 11/2 

 11  

85/8 

43/8 

43/8 

   2 × 2

 12  

9

41/4 

43/4 

   3 × 11/2 

 16  

85/8 

51/16 

37/8 

   3 × 2

 17  

9

5

43/16 

   3 × 3

 21  

101/2 

51/2 

5

   4 × 11/2 

 17  

91/8 

513/16 

37/8 

   4 × 2

 21  

9

53/4 

311/16 

   4 × 3

 26  

101/2 

61/4 

41/2 

   4 × 4

 30  

12

63/4 

51/4 

   6 × 2

 28  

9

71/8 

211/16 

   6 × 3

 35  

101/2 

75/8 

31/2 

   6 × 4

 45  

121/4 

81/4 

41/4 

   6 × 6

 60  

143/4 

91/8 

53/4 

   8 × 2

 60  

167/8 

9

41/2 

   8 × 3

 63  

121/8 

9

33/4 

   8 × 4

 65  

131/2 

10

41/2 

   8 × 6

 79  

161/2 

11

61/16 

   8 × 8

117  

191/2 

121/4 

71/4 

  10 × 4

160  

131/2 

111/2 

31/2 

  10 × 6

165  

165/8 

131/2 

37/8 

  10 × 8

170  

193/4 

143/8 

43/8 

  10 × 10

180  

221/2 

15

75/8 

  12 × 4

173  

181/4 

153/16 

41/2 

  12 × 6

196  

181/4 

161/2 

41/2 

  12 × 8

200  

233/8 

151/2 

5

  12 × 10

275  

27

191/2 

6

  12 × 12

288  

251/2 

183/8 

71/4 

  15 × 15

455

321/8 

223/4 

81/8 


Note 11 in. = 25.4 mm.
FIG. 38 Sanitary Y Branches
Double-Branch Sanitary Tee
FIG. 39 Double-Branch Sanitary Tee
Double-Branch Sanitary Y

Size, in.

Weight, lb

A, in.

B, in.

C, in.

2 × 11/2 

14

85/8 

43/8 

43/8 

2 × 2

15

9

41/4 

43/4 

3 × 11/2 

19

85/8 

51/16 

37/8 

3 × 2

20

9

5

43/16 

3 × 3

28

101/2 

51/2 

5

4 × 11/2 

21

91/8 

513/16 

37/8 

4 × 2

23

9

53/4 

311/16 

4 × 3

26

101/2 

61/4 

41/2 

4 × 4

33

12

63/4 

51/4 

6 × 2

31

9

71/8 

211/16 

6 × 3

46

101/2 

75/8 

31/2 

6 × 4

52

12

81/8 

41/4 

6 × 6

65

143/4 

91/8 

53/4 

8 × 4

71

131/2 

10

101/2 

8 × 6

86

161/2 

11

61/16 


Note 11 in. = 25.4 mm.
FIG. 40 Double-Branch Sanitary Y
Double-Branch Sanitary Combination Y and Bend (T-Y)

Size, in.

Weight,
 lb

A, in.

B and B,
in.

C, in.

E, in.

2 × 11/2 

15 

85/8 

91/4 

43/8 

73/8 

2 × 2

17 

9

101/2 

43/4 

81/4 

3 × 11/2 

17 

85/8 

101/4 

37/8 

73/8 

3 × 2

22 

9

111/2 

43/16 

83/16 

3 × 3

27 

101/2 

13

5

99/16 

4 × 11/2 

24 

91/8 

113/4 

37/8 

81/8 

4 × 2

24 

9

121/2 

311/16 

83/16 

4 × 3

28 

101/2 

14

41/2 

99/16 

4 × 4

40 

12

151/2 

51/4 

1013/16 

6 × 3

45 

101/2 

16

31/2 

99/16 

6 × 4

57 

12

171/2 

41/4 

1013/16 

6 × 6

83 

15

201/2 

53/4 

137/16 


Note 11 in. = 25.4 mm.
FIG. 41 Double-Branch Sanitary Combination Y and 1/8 Bend (T-Y)
Short-Sweep Quarter Bends

Size, in.

Weight, lb

B, in.

C, in.

2

11

51/4 

 8

3

20

 9

4

25

61/2 

10


Note 11 in. = 25.4 mm.
FIG. 42 Short-Sweep Quarter Bends
Long-Sweep Quarter Bends

Size,
in.

Weight,  
lb

B,
in.

C,
in.

2

14  

81/2 

12

3

24  

9

121/2 

4

29  

91/2 

13

6

47  

101/2 

14

8

98

111/8 

15


Note 11 in. = 25.4 mm.
FIG. 43 Long-Sweep Quarter Bends
Sanitary Combination Y and Bend (T-Y)

Size,
 in.

Weight,
  lb

A,
in.

B,
in.

C,
in.

E,
in.

 2 × 11/2 

 11

85/8 

45/8 

43/8 

73/8 

 2 × 2

 13

9

51/4 

43/4 

81/4 

 3 × 11/2 

 14

85/8 

51/8 

37/8 

73/8 

 3 × 2

 18

9

53/4 

43/16 

83/16 

 3 × 3

 24

101/2 

61/2 

5

99/16 

 4 × 11/2 

 17

91/8 

57/8 

37/8 

81/8 

 4 × 2

 21

9

61/4 

311/16 

83/16 

 4 × 3

 23

101/2 

7

41/2 

99/16 

 4 × 4

 31

12

73/4 

51/4 

103/16 

 6 × 2

 33

9

71/4 

211/16 

83/16 

 6 × 3

 37

101/2 

8

31/2 

99/16 

 6 × 4

 47

12

83/4 

41/4 

1013/16 

 6 × 6

 63

15

101/4 

53/4 

137/16 

10 × 6

185

163/4 

121/2 

47/16 

43/8 

10 × 8

192

213/8 

151/8 

61/2 

181/2 


Note 11 in. = 25.4 mm.
FIG. 44 Sanitary Combination Y and 1/8 Bend (T-Y)
Quarter Bends

Size,
in.

Weight,
lb

B,
in.

C,
in.

2

  9

31/2 

7

3

 16

4

71/2 

4

 20

41/2 

8

6

 36

51/2 

9

8

 54

61/8 

10

10

116

85/8 

12

12

195

103/8 

14


Note 11 in. = 25.4 mm.
FIG. 45 Quarter Bends
Sixth Bends

Size,
in.

Weight,
lb

 B,
 in.

 C,
 in.

2

 8

21/4 

53/4 

3

11

21/2 

6

4

15

23/16 

65/16 

6

27

33/8 

67/8 

8

71

41/8 

9


Note 11 in. = 25.4 mm.
FIG. 46 Sixth Bends
Eighth Bends

Size,
in.

Weight,
lb

B,
in.

C,
in.

 2

  7

13/4 

51/4 

 3

 13

115/16 

57/16 

 4

 16

23/16 

511/16 

 6

 25

29/16 

61/16 

 8

 46

311/16 

813/16 

10

 95

41/4 

91/4 

12

132

5

95/8 


Note 11 in. = 25.4 mm.
FIG. 47 Eighth Bends
Sixteenth Bends

Size,
in.

Weight,
lb

 B,
 in.

 C,
 in.

2

 6

11/8 

45/8 

3

 8

13/16 

411/16 

4

11

15/16 

413/16 

6

21

11/2 

5

8

44

21/16 

71/8 

10

80

2

67/8 


Note 11 in. = 25.4 mm.
FIG. 48 Sixteenth Bends
Sanitary Increasers

Size,
in.

Weight,
lb

A,
in.

    2 × 3

 9

9

    2 × 4

13

9

    2 × 6

17

9

    3 × 4

17

9

    3 × 6

16

9

    4 × 6

17

9

    4 × 8

33

115/8 

    6 × 8

50

117/8 

    8 × 10

85

16


Note 11 in. = 25.4 mm.
FIG. 49 Sanitary Increasers
Hub Strainers

Size,
in.

Weight,
lb

2

        21/2 

3

        3

4

        5

6

        10

8

        18


Note 11 in. = 25.4 mm.
FIG. 50 Hub Strainers
Sanitary Reducers

Size,
in.

Weight,
lb

A, in.

 

3 × 11/2 

 6

5

 

3 × 2

 7

5

 

4 × 11/2 

 7

5

 

4 × 2

 9

5

 

4 × 3

11

5

 

6 × 2

12

5

 

6 × 3

13

5

 

6 × 4

14

5

 

8 × 4

22

6

 

8 × 6

25

6

 

10 × 6

39

6

 

10 × 8

51

6

 

12 × 6

55

 61/2 

 

12 × 8

65

6

 

12 × 10

83

6

 

15 × 6

79

6

 

15 × 12

109 

6


Note 11 in. = 25.4 mm.
FIG. 51 Sanitary Reducers
Double Hubs

Size,
in.

Weight,
lb

A,
in.

 2

61/2 

1

 3

9 

1

 4

12

1

 6

18

1

 8

40

2

10

82

2


Note 11 in. = 25.4 mm.
FIG. 52 Double Hubs
Pipe Plugs

 

Size,
in.

Weight,
lb

 

 

 2

 2

 

 

 3

 3

 

 

 4

 5

 

 

 6

10

 

 

 8

17

 

 

12

56

 


Note 11 in. = 25.4 mm.
FIG. 53 Pipe Plugs
Cleanout Plugs

 

Size,
in.

Weight,
lb

 

 

 2

31/2 

 

 

 3

61/2 

 

 

 4

11 

 

 

 6

14 

 

 

 8

26 

 

 

10

39 

 


Note 11 in. = 25.4 mm.
FIG. 54 Cleanout Plugs
Adapter—Plain-End and Split Flange

Size,
in.

Weight,
lb

A,
in.

J,
in.

2

 5

   53/4 

   6

3

11

   7

   71/2 

4

12

   8

   9

6

22

   91/2 

   11

8

44

   103/4 

   131/2 


Note 11 in. = 25.4 mm.
FIG. 55 Adapter—Plain-End and Split Flange
Adapter—Hub and Split Flange

Size,
in.

Weight,
lb

A,
in.

J,
in.

2

 5

21/2 

6 

3

 7

21/2 

71/2  

4

12

23/4 

9 

6

16

3  

11  

8

36

31/2 

131/2 


Note 11 in. = 25.4 mm.
FIG. 56 Adapter—Hub and Split Flange
Combination Cleanout and Test Tees

Size,
in.

Weight,
lb

A,
in.

B,
in.

 C,
 i n.

D,
in.

E,
in.

F,
in.

2

12

21/2  

 9

 313/16 

35/8 

31/16 

 27/8 

3

22

27/8  

10

 5

45/8 

41/4  

 313/16 

4

29

39/16 

11

 57/16 

55/8 

41/2  

 413/16 


Note 11 in. = 25.4 mm.
FIG. 57 Combination Cleanout and Test Tees
Insertable Joints

Plate No.

Size,
in.

Weight,
lb

A,
in.

B,
in.

5045

2

11

73/4 

61/2 

5070

3

17

83/8 

73/8 

5095

4

21

91/8 

77/8 

5144

6

37

91/8 

77/8 


Note 11 in. = 25.4 mm.
FIG. 58 Insertable Joints
Backwater Valves

 

Size, in.

 

 

3

 

 

4

 

 

6

 

 

8

 


Note 11 in. = 25.4 mm.
FIG. 59 Backwater Valves
Sanitary P Traps

Size,
in.

Without
Vent
Weight, lb

Hub
Vent
Weight, lb

A,
in.

B,
in.

C,
in.

D,
in.

E,
in.

G,
in.

H,
in.

Vent,
in.

2

12

16

11

3

61/4 

41/2 

21/4 

  313/16 

  15/8 

2

3

25

32

121/2 

41/4 

61/4 

51/2 

3

  41/2 

  25/16 

3

4

37

45

14

51/2 

7

61/2 

31/4 

  53/16 

  3

4

6

68

80

17

81/2 

8

81/2 

4

  61/2 

  315/16 

4


Note 1Depth of seal on all traps shall be 21/2 in.
Note 21 in. = 25.4 mm.
FIG. 60 Sanitary P Traps
Sanitary S Traps

Size,
in.

Without
Vent,
Weight, lb

Hub
Vent,
Weight, lb

A,
in.

B,
in.

C,
in.

D,
in.

E,
in.

F,
in.

G,
in.

H,
in.

Vent,
in.

2

16

18

91/4  

3

 8

41/2 

33/4 

43/4 

  313/16 

  15/8 

2

3

24

29

101/2 

41/4 

10

51/2 

41/4 

61/4 

  41/2 

  25/16 

3

4

33

39

111/4 

51/2 

12

61/2 

41/4 

7

  53/16 

  3

4

6

82

89

14

81/2 

16

81/2 

5

9

  61/2 

  315/16 

4


Note 1Depth of seal on all traps shall be 21/2 in.
Note 21 in. = 25.4 mm.
FIG. 61 Sanitary S Traps
Sanitary Running Traps

Size,
in.

Without
Vent,
Weight, lb

Single
Hub Vent,
Weight, lb

Double
Hub Vent,
Weight, lb

A,
in.

B,
in.

D,
in.

E,
in.

F,
in.

G,
in.

H,
in.

Vent,
in.

 2

 14

 17

 22

131/2 

21/2 

41/2 

21/2 

51/4 

  85/16 

  15/8 

2

 3

 29

 36

 42

151/2 

3

51/2 

31/4 

61/4 

  10

  25/16 

3

 4

 41

 49

 57

171/2 

31/2 

61/2 

31/2 

71/4 

  1111/16 

  3

4

 6

 78

 87

168

211/2 

41/2 

81/2 

41/4 

81/4 

  15

  315/16 

4

 8

162

165

208

267/8 

51/2 

11

37/8 

12

  187/16 

  51/4 

6

10

330

334

346

317/8 

71/8 

13

51/8 

16

  221/4 

  611/16 

6


Note 1Single hub vent is located on the inlet side. Depth of seal on 8 and 10-in. traps is 3 in. All others 21/2 in.
Note 21 in. = 25.4 mm.
FIG. 62 Sanitary Running Traps
Outside Caulk

Plate
No.

Outlet
Size, in.

Weight, lb

1

2, 3, 4 and 6

45

2

2, 3, 4 and 6

45

3

2, 3, 4 and 6

53

4

2, 3, 4 and 6

53

5

2, 3, 4 and 6

41

6

2, 3, 4 and 6

42

7

2, 3, 4 and 6

48

8

2, 3, 4 and 6

49


Note 11 in. = 25.4 mm.
FIG. 63 Outside Caulk
Outside Caulk with Basin

Plate
No.

Size,
in.

A,
in.

B,
in.

C,
in.

5, 6, 7, 8

2

27/8 

31/2 

5/16 

 

3

37/8 

41/2 

5/16 

 

4

47/8 

51/2 

3/8  

 

6

7

73/4 

3/8 


Note 11 in. = 25.4 mm.
FIG. 64 Outside Caulk with Basin
Inside Caulk
Note 11 in. = 25.4 mm.
FIG. 65 Inside Caulk
Floor Drains

Plate
No.

Outlet
Size, in.

Weight, lb

1

3

70

2

4

73

3

2

37

4

2

45


Plate
No.

Size,
in.

A,
in.

B,
in.

C,
in.

D,
in.

E,
in.

F,
in.

1
2

3
4

8
8

9
9

57/8 
63/8 

11/2 
11/2 

14
14

141/2 
141/2 


Note 11 in. = 25.4 mm.
FIG. 66 Floor Drains
 Method of Installation
FIG. 67 Method of Installation
Floor Drain Funnel Attachment
Note 11 in. = 25.4 mm.
FIG. 68 Floor Drain Funnel Attachment
No. 1, 2, 3, 4, and 5 Overflows

Plate
No.

A, in.A

B, in.A

C, in.

1

2

 41/8 

1

2

4

 61/8 

1

3

6

 81/8 

1

4

8

101/8 

1

5

0

 21/8 

1




A Dimensions A and B will vary depending upon the sink strainer in which overflow is placed, depth of counterbars, and so forth. Dimension B is given only as a guide.
Note 11 in. = 25.4 mm.
FIG. 69 No. 1, 2, 3, 4, and 5 Overflows
Sink Outlet

Plate
No.

Size,
in.

A,
in.

B,
in.

C,
in.

D,
in.

E,
in.

1

11/2 or 2

3/4 to 11/4 

10

31/2 

  43/8 

  1/8 

2

11/2 or 2

 1 to 2

10

21/2 

  37/8 

  7/16 

3

11/2 or 2

 1 to 2

10

21/2 

  3

  1/4 

4

11/2 

 0 to 2

101/4 

 

  35/16 

  1/4 


Note 1Furnished with flat loose strainer plates.
Note 21 in. = 25.4 mm.
FIG. 70 Sink Outlet
Detailed Cross Section of Cleanout

Size, in.

Diameter
of Drain, in.

A, in.

Under 6

11/2 

23/16 

6 and over

21/4 

29/16 


Note 1Traps can be supplied without cleanouts, as shown in the figure.
Note 21 in. = 25.4 mm.
FIG. 71 Detailed Cross Section of Cleanout

1.4.1 Pipe:

1.4.1.1 No-hub (MJ) (Fig. 1):

 

Size (in.)

Length (ft)

 

11/2 

7

 

2

7

 

3

7

 

4

7


1.4.1.2 Hub/Plain End (Fig.35):

 

Size (in.)

Length (ft)

 

 2

7

 

 3

7

 

 4

7

 

 6

7

 

 8

7

 

10

5

 

12

5

 

15

5


1.4.2 Fitting (No-hub) (MJ):

 

Figs.

Quarter Bends

2

Sixth Bends

3

Return Bends

4

Double-Branch Quarter Bend

5

Eighth Bends

6

Sixteenth Bends

7

Long-Sweep Quarter Bends

8

Sanitary Y Branches

9

Double-Branch Sanitary Y

10

Sanitary Combination Y and 1/8 Bend

11

Double-Branch Sanitary Combination Y and 1/8 Bend

12

Sanitary T Branches

13

Double Branch Sanitary T

14

Sanitary Running Traps

15

Sanitary P Traps

16

Swivel Trap P-Style Short

17

Swivel Trap P-Style Long

18

Swivel Trap S-Style Long

19

Centrifugal Drum Trap P Swivel Type

20

Centrifugal Drum Trap S Swivel Type

21

Combination Cleanout and Test Tees

22

Coupling

23

Pipe Plugs

24

Cleanout Plugs

25

No-hub (MJ) Adapter

26

Reducers—Increasers

27

Sink Outlet

28

Sink Overflows

29

Threaded Adapters

30

Trap Cleanout Details

31

No-hub (MJ) Adapter

32

(MJ) (No-hub) to Lead Adapter

33

Floor Drains

34


1.4.3 Fitting (Hub/Plain End):

 

Figs.

Hub Plain End Pipe

35

Straight Tees

36

Sanitary T Branches

37

Sanitary Y Branches

38

Double-Branch Sanitary Tee

39

Double-Branch Sanitary Y

40

Double-Branch Sanitary Combination Y and 1/8 Bend (T-Y)

41

Short-Sweep Quarter Bends

42

Long-Sweep Quarter Bends

43

Sanitary Combination Y and 1/8 Bend (T-Y)

44

Quarter Bends

45

Sixth Bends

46

Eighth Bends

47

Sixteenth Bends

48

Sanitary Increasers

49

Hub Strainers

50

Sanitary Reducers

51

Double Hubs

52

Pipe Plugs

53

Cleanout Plugs

54

Adapter—Plain end to Split Flange

55

Adapter—Hub to-Split Flange

56

Combination Cleanout and Test Tees

57

Insertable Joints

58

Backwater Valves

59

Sanitary P Traps

60

Sanitary S Traps

61

Sanitary Running Traps

62

Floor Drains

63, 64, 65

Floor Drains

66

Floor Drains/Installation—Funnel Attachment

67, 68

Overflow

69

Sink Outlet

70

Detailed Cross Section of Cleanout

71

Chemical Composition

Table 3

Transverse Bend Test Minimum Requirements

Table S1.1


Details

ICS-code 23.040.10
23.040.40
Nederlandse titel Standard Specification for High-Silicon Iron Pipe and Fittings
Engelse titel Standard Specification for High-Silicon Iron Pipe and Fittings

Winkelwagen

Subtotaal:

Ga naar winkelwagen