Norm

ASTM B453/B453M-11e1

Standard Specification for Copper-Zinc-Lead Alloy (Leaded-Brass) Rod, Bar, and Shapes

54,27

Over deze norm

Status Definitief
Aantal pagina's 6
Commissie B05.02
Gepubliceerd op 01-10-2011
Taal Engels

1.1 This specification establishes the requirements for copper-zinc-lead alloy (leaded-brass) rod, bar, wire, and shapes produced from Copper Alloys UNS Nos. C33500, C34000, C34500, C35000, C35300, C35330, C35350, and C35600. These alloys have nominal composition given in Table 1.

TABLE 1 Nominal Composition, %

Copper Alloy
UNS No.

Copper

Zinc

Lead

C33500

63.5

36.0

0.5

C34000

63.5

35.3

1.2

C34500

63.5

34.5

2.0

C35000

61.5

37.1

1.4

C35300

61.5

36.5

2.0

C35330

61.8

35.7

2.5

C35350

62.0

34.5

3.2

C35600

61.5

36.0

2.5


1.1.1 This product is suitable for applications requiring extensive machining before such cold-forming operations as swaging, flaring, severe knurling, or thread rolling.

Note 1Refer to Appendix X1 for additional applications information.

1.1.2 Typically, product made to this specification is furnished as straight lengths. Sizes 1/2 in. [12 mm] and under may be furnished as wire in coils or on reels when requested.

1.2 The values stated in either SI units or inch-pound units are to be regarded separately as standard. The values stated in each system may not be exact equivalents; therefore, each system shall be used independently of the other. Combining values from the two systems may result in non-conformance with the standard.

Note 2Refer to Specifications B16/B16M and B140/B140M for copper-zinc-lead (leaded-brass) rod and bar for screw machine applications.

Details

ICS-code 77.150.30
Nederlandse titel Standard Specification for Copper-Zinc-Lead Alloy (Leaded-Brass) Rod, Bar, and Shapes
Engelse titel Standard Specification for Copper-Zinc-Lead Alloy (Leaded-Brass) Rod, Bar, and Shapes

Winkelwagen

Subtotaal:

Ga naar winkelwagen