Norm

ASTM B626 - 17 en

Standard Specification for Welded Nickel and Nickel-Cobalt Alloy Tube

  • Deze norm is ingetrokken sinds 01-07-2017

50,60 61,23 Incl BTW

Over deze norm

Status Ingetrokken
Aantal pagina's 5
Gepubliceerd op 01-06-2017
Taal Engels

1.1 This specification covers welded tubes made from the nickel and nickel-cobalt alloys (UNS N10001, UNS N10242, UNS N10665, UNS N12160, UNS N10629, UNS N10624, UNS N10675, UNS N10276, UNS N06455, UNS N06007, UNS N06975, UNS N08320, UNS N06985, UNS N06002, UNS N06022, UNS N06030, UNS N06035, UNS N06044, UNS N06058, UNS N06059, UNS N06200, UNS N06617, UNS N10362, UNS N06210, UNS N08031, UNS R30556, UNS N06230, UNS N06686, and UNS R20033)2 listed in Table 1 intended for heat exchanger and condenser tubes and tubes for general corrosive service for heat-resisting applications.

TABLE 1 Chemical Requirements

Composition Limits, %

 

Ni

Cr

Mo

Fe

W

C

Si
max

Co

Mn

V

P
max

S
max

Ti

Cu

Cb
(Nb)
+Ta

Al

Zr

La

N

B

Cb
(Nb)

Ta

Ni+
Mo

Mg

Ni-Mo Alloys

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

N10001

remainder

1.0  max

26.0-  30.0

4.0-6.0

...

0.05  max

1.0

2.5  max

1.0  max

0.2-  0.4

0.04

0.03

...

...

...

 

 

 

 

 

 

 

 

 

N10665

remainder

1.0  max

26.0-  30.0

2.0 max

...

0.02  max

0.10

1.0  max

1.0  max

...

0.04

0.03

...

...

...

 

 

 

 

 

 

 

 

 

N10675

65.0 min

1.0-  3.0

27.0-  32.0

1.0-3.0

3.0  max

0.01  max

0.10

3.0  max

3.0  max

0.20  max

0.030

0.010

0.20  max

0.20  max

...

0.50  max

0.10  max

...

...

...

0.20  max

0.20  max

94.0-  98.0

 

N10629

remainder

0.5-  1.5

26.0-  30.0

1.0-6.0

...

0.01  max

0.05

2.5  max

1.5  max

...

0.04

0.01

...

0.5  max

...

0.1-  0.5

...

...

...

...

...

...

...

 

N10624

remainder

6.0-  10.0

21.0-  25.0

5.0-8.0

...

0.01  max

0.10

1.0  max

1.0  max

...

0.025

0.01

...

0.5  max

...

...

...

...

...

...

...

...

...

 

Ni-Mo-Cr-Fe Alloy

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

N10242

remainder

7.0-  9.0

24.0-  26.0

2.0 max

 

0.03  max

0.80

1.00  max

0.80  max

 

0.030

0.015

 

0.50  max

 

0.50  max

 

 

 

0.006  max

 

 

 

 

Low C Ni-Cr-Mo Alloys

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

N10276

remainder

14.5-  16.5

15.0-  17.0

4.0-7.0

3.0-  4.5

0.010  max

0.08

2.5  max

1.0  max

0.35  max

0.04

0.03

...

...

...

 

 

 

 

 

 

 

 

 

N06022

remainder

20.0-  22.5

12.5-  14.5

2.0-6.0

2.5-  3.5

0.015  max

0.08

2.5  max

0.5  max

0.35  max

0.02

0.02

...

...

...

 

 

 

 

 

 

 

 

 

N06035

remainder

32.25-
34.25

7.60-
9.00

2.00 max

0.60 max

0.050 max

0.60

1.00 max

0.50 max

0.20 max

0.030

0.015

...

0.30  max

...

0.40  max

 

 

 

 

 

 

 

 

N06044

balance

43.5-
45.3

0.80-
1.20

0.3 max

...

0.02 max

0.20

...

0.07-
0.30

...

0.020

0.020

0.10-
0.30

...

...

0.30 max

...

...

...

...

...

...

...

...

N06058

balance

20.0-  23.0

18.5-  21.0

1.5 max

0.3  max

0.010  max

0.10

0.3  max

0.50  max

 

0.015

0.010

...

0.50  max

...

0.40  max

 

 

0.02-  0.15

 

 

 

 

 

N06059

balance

22.0-  24.0

15.0-  16.5

1.5 max

...

0.010  max

0.10

0.3  max

0.5  max

...

0.015

0.010

...

0.50  max

...

0.1-  0.4

...

...

...

...

...

...

...

 

N06455

remainder

14.0-  18.0

14.0-  17.0

3.0 max

...

0.015  max

0.08

2.0  max

1.0  max

...

0.04

0.03

0.70  max

...

...

 

 

 

 

 

 

 

 

 

Ni-Cr-Fe-Mo-Cu Alloys

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

N06007

remainder

21.0-  23.5

5.5-  7.5

18.0-21.0

1.0  max

0.05  max

1.0

2.5  max

1.0-  2.0

...

0.04

0.03

...

1.5-  2.5

1.75-  2.5

 

 

 

 

 

 

 

 

 

N06975

47.0-52.0

23.0-  26.0

5.0-  7.0

remainder

...

0.03  max

1.0

...

1.0  max

...

0.03

0.03

0.70-  1.50

0.70-  1.20

...

 

 

 

 

 

 

 

 

 

N06985

remainder

21.0-  23.5

6.0-  8.0

18.0-21.0

1.5  max

0.015  max

1.0  

5.0  max

1.0  max

...

0.04

0.03

...

1.5-  2.5

0.50  max

 

 

 

 

 

 

 

 

 

N06030

remainder

28.0-  31.5

4.0-6.0

13.0-17.0

1.5-  4.0

0.03  max

0.8

5.0  max

1.5  max

...

0.04

0.02

...

1.0-  2.4

0.30-  1.50

 

 

 

 

 

 

 

 

 

Ni-Fe-Cr-Mo Alloys

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

N08320

25.0-27.0

21.0-  23.0

4.0-  6.0

remainder

...

0.05  max

1.0

...

2.5  max

...

0.04

0.03

4xC  min

...

...

 

 

 

 

 

 

 

 

 

Ni-Cr-Mo-Fe Alloy

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

N06002

remainder

20.5-  23.0

8.0-  10.0

17.0-20.0

0.20-  1.0

0.05-  0.15

1.0

0.5-2.5

1.0  max

...

0.04

0.03

...

...

...

 

 

 

 

 

 

 

 

 

Ni-Fe-Cr-Co Alloy

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

R30556

19.0-22.5

21.0-  23.0

2.5-  4.0

remainder

2.0-  3.5

0.05-  0.15

0.20-  0.80

16.0-  21.0

0.50-  2.00

...

0.04

0.015

...

...

...

0.10-  0.50

0.001-  0.10

0.005-  0.10

0.10-  0.30

0.02  max

0.30  max

0.3-  1.25

 

 

Ni-Cr-W-Mo Alloy

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

N06230

remainder

20.0-  24.0

1.0-  3.0

3.0 max

13.0-  15.0

0.05-  0.15

0.25-  0.75

5.0  max

0.30-  1.00

...

0.03

0.015

...

...

...

0.50 max

...

0.005-  0.050

...

0.015  max

...

...

 

 

Low C-Ni-Cr-Mo-Cu Alloy

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

N06200

remainder

22.0-  24.0

15.0-  17.0

3.0 max

...

0.010  max

0.08

2.0  max

0.50  max

...

0.025

0.010

...

1.3-  1.9

...

0.50  max

 

 

 

 

 

 

 

 

Ni-Cr-Co-Mo Alloys

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

N06617

44.5 min

20.0-
24.0

8.0-10.0

3.0 max

...

0.05-
0.15

1.0

10.0-
15.0

1.0 max

...

...

0.015

0.6 max

0.5 max

...

0.8-1.5

...

...

...

0.006

...

...

...

...

Low C-Ni-Mo-Cr Alloy

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

N10362

remainder

13.8-
15.6

21.5-23.0

1.25 max

...

0.010 max

0.08

...

0.60 max

...

0.025

0.010

...

...

...

0.50 max

...

...

...

...

...

...

...

...

Low C-Ni-Fe-Cr-Mo-Cu Alloy

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

N08031

30.0-32.0

26.0-  28.0

6.0-  7.0

balance

...

0.015  max

0.3

...

2.0  max

...

0.020

0.010

...

1.0-  1.4

...

...

...

...

0.15-  0.25

...

...

...

 

 

Low C-Ni-Cr-Mo-W Alloy

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

N06686

remainder

19.0-  23.0

15.0-  17.0

5.0 max

3.0-  4.4

0.010  max

0.08

...

0.75  max

...

0.04

0.02

0.02-  0.25

...

...

...

...

...

...

...

...

...

 

 

Ni-Co-Cr-Si Alloy

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

N12160

remainder

26.0-  30.0

1.0  max

3.5 max

1.0  max

0.15  max

2.4-  3.0

27.0-  33.0

1.5  max

...

0.030

0.015

0.20-  0.80

...

...

...

...

...

...

...

1.0  max

...

...

...

Cr-Ni-Fe-N Alloy

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

R20033

30.0-33.0

31.0-  35.0

0.50-  2.0

balance

...

0.015  max

0.50

...

2.0  max

...

0.02

0.01

...

0.3-  1.20

...

...

...

...

0.35-  0.60

...

...

...

...

...

Low C-Ni-Mo-Cr-Ta Alloy

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

N06210

remainder

18.0-  20.0

18.0-  20.0

1.0 max

...

0.015  max

0.08

1.0  max

0.5

0.35  max

0.02

0.02

...

 

...

 

...

...

...

...

...

1.5-2.2

 

 

1.2 This specification covers tube 1/8 to 31/2 in. (3.2 to 88.9 mm) in outside diameter and 0.015 to 0.148 in. (0.41 to 3.7 mm) inclusive, in wall thickness.

1.3 The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard.

1.4 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to become familiar with all hazards including those identified in the appropriate Safety Data Sheet (SDS) for this product/material as provided by the manufacturer, to establish appropriate safety and health practices, and determine the applicability of regulatory limitations prior to use.

1.5 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Details

ICS-code 23.040.15
Engelse titel Standard Specification for Welded Nickel and Nickel-Cobalt Alloy Tube
Vervangt
Vervangen door

Winkelwagen

Subtotaal:

Ga naar winkelwagen