Norm

ASTM B783 - 10 en

Standard Specification for Materials for Ferrous Powder Metallurgy (P/M) Structural Parts

  • Deze norm is ingetrokken sinds 01-11-2013

73,70 89,18 Incl BTW

Over deze norm

Status Ingetrokken
Aantal pagina's 39
Gepubliceerd op 01-01-2010
Taal Engels

1.1 This specification covers a variety of ferrous PM structural materials and includes a classification system or material designation code. The classification system used in this specification includes chemical composition, minimum tensile; 0.2 % offset yield strength for as-sintered materials and minimum ultimate tensile strength for heat-treated materials (sinter hardened or quenched and tempered). It also contains minimum density and maximum coercive field strength requirements for iron-phosphorus materials.

1.2 Material classification is governed by the designation code which is explained in Appendix X1. The data provided display typical mechanical properties achieved under commercial manufacturing procedures. Physical and mechanical property performance characteristics can change as a result of subsequent processing steps beyond the steps designated in this standard.

1.3 With the exception of density values for which the g/cm3 unit is the industry standard, property values stated in inch-pound units are the standard. Values in SI units result from conversion in accordance with . They may be approximate and are only for information.

Details

ICS-code 77.160
Engelse titel Standard Specification for Materials for Ferrous Powder Metallurgy (P/M) Structural Parts
Vervangen door

Winkelwagen

Subtotaal:

Ga naar winkelwagen