Norm

ASTM C1128 - 18 en

Standard Guide for Preparation of Working Reference Materials for Use in Analysis of Nuclear Fuel Cycle Materials

73,70 89,18 Incl BTW

Over deze norm

Status Definitief
Aantal pagina's 26
Gepubliceerd op 01-01-2018
Taal Engels

1.1 This guide covers the preparation and characterization of working reference materials (WRM) that are produced by a laboratory for its own use in the analysis of nuclear fuel cycle materials. Guidance is provided for proper preparation, packaging, and storage; requirements for characterization; homogeneity and stability considerations; and establishing traceability of WRMs to certified reference materials by a defined, statistically sound characterization process. While the guidance provided is generic for nuclear fuel cycle materials, detailed examples for some materials are provided in the appendixes.

1.2 This guide does not apply to the preparation and characterization of certified reference materials (CRM). Refer to ISO 17034 and Guide 35 for those requirements.

1.3 The information provided by this guide is found in the following sections:

 

Section

Perform WRM Planning

6

Select, Collect, Prepare, and Process Materials

7

Packaging and Store Materials

8

Perform Homogeneity Study

9

Perform Stability Studies

10

Characterize Materials

11

Perform Uncertainty Analysis

12

Produce Documentation

13

Carry Out WRM Utilization and Monitoring

14

1.4 The values stated in SI units are to be regarded as standard. Any non-SI units of measurement shown in parentheses are for information only.

1.5 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use.

1.6 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Details

ICS-code 27.120.30
Engelse titel Standard Guide for Preparation of Working Reference Materials for Use in Analysis of Nuclear Fuel Cycle Materials
Vervangt

Winkelwagen

Subtotaal:

Ga naar winkelwagen