Norm

ASTM C1242 - 12ae1 en

Standard Guide for Selection, Design, and Installation of Dimension Stone Attachment Systems

  • Deze norm is ingetrokken sinds 01-05-2014

57,20 69,21 Incl BTW

Over deze norm

Status Ingetrokken
Aantal pagina's 18
Gepubliceerd op 15-06-2012
Taal Engels

1.1 This guide covers the categories of anchors and anchoring systems and discusses the design principles to be considered in selecting anchors or systems that will resist gravity loads and applied loads.

1.2 This guide sets forth basic requirements for the design of stone anchorage and provides a practical checklist of those design considerations.

1.3 This guide pertains to:

1.3.1 The anchoring of stone panels directly to the building structure for support,

1.3.2 The anchoring of stone panels to subframes or to curtainwall components after these support systems are attached to the building structure,

1.3.3 The anchoring of stone panels to subframes or to curtainwall components with stone cladding preassembled before these support systems are attached to the building structure, and

1.3.4 The supervision and inspection of fabrication and installation of the above.

1.4 Observe all applicable regulations, specific recommendations of the manufacturers, and standards governing interfacing work.

1.5 The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard.

TABLE 1 Dimension Stone Specifications

Stone Type

ASTM Specification

CalciteA

C503

DolomiteA

C503

Granite

C615

LimestoneB

C568

Marble (exterior)B

C503

Quartz-BasedB

C616

QuartziteA

C616

Quartzitic SandstoneA

C616

SandstoneA

C616

SerpentineA

C503

Serpentine

C1526

Slate (roof)

C406

Slate (walls)

C629

TravertineA

C1527

A This stone type is a subclassification.
B This stone type has subclassifications or grades.
TABLE 2 Dimension Stone Test Methods

Measures

ASTM Test Method

liquid porosity and relative density

 C97

combined shear with tensile unit strength from bending

 C99

ultimate crushing unit strength

  C170

primary tensile unit strength from bending

  C880

capacity and deflections of panels assembled with their anchors onto their supporting backup structure

   C1201

individual anchor strength

   C1354

accelerated production of service life

   E632


Dowel Anchor
FIG. 1 Dowel Anchor
Kerf Anchor
FIG. 2 Kerf Anchor
Rod and Plug Anchor
FIG. 3 Rod and Plug Anchor
Adhesive Embedded Threaded Anchor
FIG. 4 Adhesive Embedded Threaded Anchor
Point Loading Prevention
FIG. 5 Point Loading Prevention
Point Loading Prevention
FIG. 5 Point Loading Prevention (continued)
Disc Anchor
FIG. 6 Disc Anchor
Combined Anchor
FIG. 7 Combined Anchor

1.6 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use. (See Tables 1 and 2.)

Details

ICS-code 93.020
Engelse titel Standard Guide for Selection, Design, and Installation of Dimension Stone Attachment Systems
Vervangt
Vervangen door

Winkelwagen

Subtotaal:

Ga naar winkelwagen