Norm

ASTM C1242 - 18 en

Standard Guide for Selection, Design, and Installation of Dimension Stone Attachment Systems

  • Deze norm is ingetrokken sinds 01-03-2018

57,20 69,21 Incl BTW

Over deze norm

Status Ingetrokken
Aantal pagina's 20
Gepubliceerd op 01-02-2018
Taal Engels

1.1 This guide covers the categories of anchors and anchoring systems and discusses the design principles to be considered in selecting anchors or systems that will resist gravity loads and applied loads.

1.2 This guide sets forth basic requirements for the design of stone anchorage and provides a practical checklist of those design considerations.

1.3 This guide pertains to:

1.3.1 The anchoring of stone panels directly to the building structure for support,

1.3.2 The anchoring of stone panels to subframes or to curtainwall components after these support systems are attached to the building structure,

1.3.3 The anchoring of stone panels to subframes or to curtainwall components with stone cladding preassembled before these support systems are attached to the building structure, and

1.3.4 The supervision and inspection of fabrication and installation of the above.

1.4 Observe all applicable regulations, specific recommendations of the manufacturers, and standards governing interfacing work.

1.5 The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard.

(A) This stone type is a subclassification.
(B) This stone type has subclassifications or grades.

FIG. 1 Rod and Plug Anchor

Rod and Plug AnchorRod and Plug Anchor

FIG. 2 Adhesive Embedded Threaded Anchor

Adhesive Embedded Threaded AnchorAdhesive Embedded Threaded Anchor

FIG. 3 Point Loading Prevention

Point Loading PreventionPoint Loading Prevention

FIG. 3 Point Loading Prevention (continued)

Point Loading PreventionPoint Loading Prevention

FIG. 4 Disc Anchor

Disc AnchorDisc Anchor

FIG. 5 Combined Anchor

Combined AnchorCombined Anchor

1.6 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. (See Tables 1 and 2.)

1.7 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Details

ICS-code 93.020
Engelse titel Standard Guide for Selection, Design, and Installation of Dimension Stone Attachment Systems
Vervangt
Vervangen door

Winkelwagen

Subtotaal:

Ga naar winkelwagen