Norm

ASTM C1409-12

Standard Guide for Measuring and Estimating Quantities of Insulated Piping and Components

54,27

Over deze norm

Status Definitief
Aantal pagina's 8
Commissie C16.40
Gepubliceerd op 01-09-2012
Taal Engels

1.1 This guide defines the components of an insulated piping system to be measured or counted to determine quantities and pricing for unit price contracts or extra work.

1.2 Pricing may be done through unit pricing for each item by pipe size, type of insulation system, insulation thickness, double or multilayer insulation, type of weatherproofing or jacketing, and pressure rating (if necessary) or through component (fitting) factor or multipliers.

1.2.1 Component (fitting) factors or multipliers, which are multipliers times the straight length of piping as shown in Table 1, determine relative prices for each component not within the scope of this guide. These factors or multipliers are to be determined by the insulating contractor relative to the given situation and insulation system specification.

TABLE 1 Piping Unit Price Schedule, Hot Insulation, 0.016-in. Thick Aluminum Jacketing, Cost per Linear Foot (All Materials and Labor Necessary for a Complete Installation)

11/2

2

21/2

3

31/2

4

31/2 DLA ,B

4 DLA,B

4 DLA,B

2 and under

21/2

3

31/2

4

6

8

10

12

14

16

18

20

24

30

Over 30 and Equipment

A DL = Double layer.
B In some insulation systems, double-layer insulation may occur at smaller thickness.

1.2.2 It is suggested that only one type of pricing be used on a project.

1.2.3 The values stated in inch-pound units are to be regarded as the standard.

Details

ICS-code 23.040.01
Nederlandse titel Standard Guide for Measuring and Estimating Quantities of Insulated Piping and Components
Engelse titel Standard Guide for Measuring and Estimating Quantities of Insulated Piping and Components

Winkelwagen

Subtotaal:

Ga naar winkelwagen