Norm

ASTM C1469-10(2015)

Standard Test Method for Shear Strength of Joints of Advanced Ceramics at Ambient Temperature

54,27

Over deze norm

Status Definitief
Aantal pagina's 8
Commissie C28.07
Gepubliceerd op 01-01-2015
Taal Engels

1.1 This test method covers the determination of shear strength of joints in advanced ceramics at ambient temperature. Test specimen geometries, test specimen fabrication methods, testing modes (that is, force or displacement control), testing rates (that is, force or displacement rate), data collection, and reporting procedures are addressed.

1.2 This test method is used to measure shear strength of ceramic joints in test specimens extracted from larger joined pieces by machining. Test specimens fabricated in this way are not expected to warp due to the relaxation of residual stresses but are expected to be much straighter and more uniform dimensionally than butt-jointed test specimens prepared by joining two halves, which are not recommended. In addition, this test method is intended for joints, which have either low or intermediate strengths with respect to the substrate material to be joined. Joints with high strengths should not be tested by this test method because of the high probability of invalid tests resulting from fractures initiating at the reaction points rather than in the joint. Determination of the shear strength of joints using this test method is appropriate particularly for advanced ceramic matrix composite materials but also may be useful for monolithic advanced ceramic materials.

1.3 Values expressed in this test method are in accordance with the International System of Units (SI) and IEEE/ASTM SI 10 .

1.4 This test method does not purport to address the safety problems associated with its use. It is the responsibility of the user of this test method to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use. Specific precautionary statements are noted in 8.1 and 8.2.

Details

ICS-code 81.060.30
Nederlandse titel Standard Test Method for Shear Strength of Joints of Advanced Ceramics at Ambient Temperature
Engelse titel Standard Test Method for Shear Strength of Joints of Advanced Ceramics at Ambient Temperature

Winkelwagen

Subtotaal:

Ga naar winkelwagen