Norm

ASTM C1531-16

Standard Test Methods for In Situ Measurement of Masonry Mortar Joint Shear Strength Index

49,88

Over deze norm

Status Definitief
Aantal pagina's 7
Commissie C15.04
Gepubliceerd op 01-06-2016
Taal Engels

1.1 These test methods cover procedures for the determination of the average in situ mortar joint shear strength index in existing unreinforced solid-unit and ungrouted hollow-unit masonry built with clay or concrete units. Three methods are provided:

1.1.1 Method A (with Flatjacks Controlling Normal Compressive Stress)—For determining mortar joint shear strength index when the state of normal compressive stress at the test site is controlled during the test using the flatjack method described in Test Method C1197. Horizontal displacement of the test unit is monitored throughout the test. The test setup for Method A is shown in Fig. 1.

1.2 The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard.

1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

Details

ICS-code 91.080.30
Nederlandse titel Standard Test Methods for In Situ Measurement of Masonry Mortar Joint Shear Strength Index
Engelse titel Standard Test Methods for In Situ Measurement of Masonry Mortar Joint Shear Strength Index

Winkelwagen

Subtotaal:

Ga naar winkelwagen