Norm

ASTM C1698-09(2014)

Standard Test Method for Autogenous Strain of Cement Paste and Mortar

54,27

Over deze norm

Status Definitief
Aantal pagina's 8
Commissie C09.68
Gepubliceerd op 01-10-2014
Taal Engels

1.1 This test method measures the bulk strain of a sealed cement paste or mortar specimen, including those containing admixtures, various supplementary cementitious materials (SCM), and other fine materials, at constant temperature and not subjected to external forces, from the time of final setting until a specified age. This strain is known as autogenous strain. Autogenous strain is most significant in concrete with low water-cementitious materials ratio (w/cm) (See Note 1).

Note 1: A low water-cementitious materials ratio (w/cm) can be considered to be a water to cement ratio of 0.40 or lower for this test.

1.2 The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard.

1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use. (Warning—Fresh hydraulic cementitious mixtures are caustic and may cause chemical burns to skin and tissue upon prolonged exposure.2)

Details

ICS-code 91.100.10
Nederlandse titel Standard Test Method for Autogenous Strain of Cement Paste and Mortar
Engelse titel Standard Test Method for Autogenous Strain of Cement Paste and Mortar

Winkelwagen

Subtotaal:

Ga naar winkelwagen