Norm

ASTM C808 - 75(2010)e1 en

Standard Guideline for Reporting Friction and Wear Test Results of Manufactured Carbon and Graphite Bearing and Seal Materials

  • Deze norm is ingetrokken sinds 01-01-2016

50,60 61,23 Incl BTW

Over deze norm

Status Ingetrokken
Aantal pagina's 6
Gepubliceerd op 01-05-2010
Taal Engels

1.1 This guide covers the following areas for reporting friction and wear test results of manufactured carbon and graphite bearing and seal materials:

1.1.1 Description of test device and techniques (Table 1 and Table 2.)

1.1.2 Description of carbon and graphite material test specimen (Table 3).

1.1.3 Description of mating member test specimen (Table 4).

1.1.4 Report of friction and wear test results (Table 5).

1.2 Many types of equipment and techniques will yield consistent data characterizing the friction and wear of carbon and graphite materials. However, the ranking of the materials by the various test methods used is not necessarily the same. This guide is an initial effort to promote more complete description of the test methods, whatever they may be. It is the eventual intent to identify one or more specific standard test methods when sufficient information becomes available.

Details

ICS-code 17.040.20
Engelse titel Standard Guideline for Reporting Friction and Wear Test Results of Manufactured Carbon and Graphite Bearing and Seal Materials
Vervangen door

Winkelwagen

Subtotaal:

Ga naar winkelwagen