Norm

ASTM C808-75(2016)

Standard Guide for Reporting Friction and Wear Test Results of Manufactured Carbon and Graphite Bearing and Seal Materials

54,27

Over deze norm

Status Definitief
Aantal pagina's 6
Commissie D02.F0
Gepubliceerd op 01-01-2016
Taal Engels

1.1 This guide covers the following areas for reporting friction and wear test results of manufactured carbon and graphite bearing and seal materials:

1.1.1 Description of test device and techniques (Table 1 and Table 2.)

1.1.2 Description of carbon and graphite material test specimen (Table 3).

1.1.3 Description of mating member test specimen (Table 4).

1.1.4 Report of friction and wear test results (Table 5).

1.2 Many types of equipment and techniques will yield consistent data characterizing the friction and wear of carbon and graphite materials. However, the ranking of the materials by the various test methods used is not necessarily the same. This guide is an initial effort to promote more complete description of the test methods, whatever they may be. It is the eventual intent to identify one or more specific standard test methods when sufficient information becomes available.

Details

ICS-code 17.040.20
Nederlandse titel Standard Guide for Reporting Friction and Wear Test Results of Manufactured Carbon and Graphite Bearing and Seal Materials
Engelse titel Standard Guide for Reporting Friction and Wear Test Results of Manufactured Carbon and Graphite Bearing and Seal Materials

Winkelwagen

Subtotaal:

Ga naar winkelwagen