Norm

ASTM D5278/D5278M-09(2013)

Standard Test Method for Elongation of Narrow Elastic Fabrics (Static-Load Testing)

48,24

Over deze norm

Status Definitief
Aantal pagina's 3
Commissie D13.59
Gepubliceerd op 01-07-2013
Taal Engels

1.1 This test method determines the elongation characteristics of narrow elastic fabrics made from natural or man-made elastomers, either alone or in combination with other textile fibers, when tested with a static load testing procedure before or after laundering.

Note 1For determination of similar characteristics using the constant-rate-of-extension (CRE) type tensile testing machine, refer to Test Method D4964.
Note 2For determination of similar characteristics using the constant-rate-of load (CRL) type tensile testing machine, refer to Test Method D1775.

1.2 The use of this test method requires the selection of, or mutual agreement upon, the effective static load at which the test results will be determined.

1.3 Laundering procedures used will be those specified in Test Method AATCC 135 for 3 washing and drying cycles.

1.4 The values stated in either SI units or inch-pound units are to be regarded separately as standard. The values stated in each system may not be exact equivalents; therefore, each system shall be used independently of the other. Combining values from the two systems may result in non-conformance with the standard.

1.5 This standard does not purport to address all of the safety problems, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

Details

ICS-code 59.080.30
Nederlandse titel Standard Test Method for Elongation of Narrow Elastic Fabrics (Static-Load Testing)
Engelse titel Standard Test Method for Elongation of Narrow Elastic Fabrics (Static-Load Testing)

Winkelwagen

Subtotaal:

Ga naar winkelwagen