Over deze norm
1.1 This specification covers the evaluation of specific performance characteristics of importance in woven and knitted shower curtains for use in institutional and household environments.
1.2 This specification may be used by mutual agreement between purchaser and supplier to establish purchasing specification requirements.
1.3 The requirements in Table 1 apply to the length and width directions for those properties where fabric direction is pertinent.
1.4 This specification is not applicable for coated, laminated or vinyl product.
1.5 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.
Note—Grade in a, b, and c, is based on a numerical scale of 5 for negligible or no color change or color transfer to 1 for severe color change or color transfer.
|Breaking Force (Load) (CRT)||7.1.1|
|Dry||178 N (40 lbf), minimum|
|Wet||89 N (20 lbf), minimum|
|Bursting Force (Knit Fabrics)||178 N (40 lbf), minimum||7.1.2|
|Dimensional Change (L× W)||3.0 % maximum||7.1.3|
|Skew||4.0 % maximum||7.1.4|
|Shade change||Grade 4A minimum|
|Stain||Grade 3B minimum|
|Dry||Grade 4C minimum|
|Wet||Grade 4C minimum|
|Light (20 AATCC AFU) (xenon arc)||Grade 4A minimum||220.127.116.11|
|Categories based on minimum time for|
|2 ft (600 mm)||2 min rain|
|3 ft (915 mm)||5 min storm|
A AATCC Gray Scale for Color Change.
B AATCC Gray Scale for Staining.
C AATCC 9-Step Chromatic Transference Scale.
|Nederlandse titel||Standard Performance Specification for Woven and Knitted Shower Curtains for Institutional and Household Use|
|Engelse titel||Standard Performance Specification for Woven and Knitted Shower Curtains for Institutional and Household Use|