Norm

ASTM D5572 - 95(2005) en

Standard Specification for Adhesives Used for Finger Joints in Nonstructural Lumber Products

  • Deze norm is ingetrokken sinds 01-10-2012

58,09 70,29 Incl BTW

Over deze norm

Status Ingetrokken
Aantal pagina's 17
Gepubliceerd op 01-04-2005
Taal Engels

1.1 This specification establishes performance levels for adhesives to be used in finger joints in nonstructural bonded-lumber products. Such products include, but are not limited to, interior and exterior mouldings, window and door components or parts, and bonded-lumber panels. Adhesives that meet the requirements of the various performance classes are considered capable of providing an adequate bond for use under the conditions described for the class. This specification is to be used to evaluate adhesives as well as the adhesive bonds in the finger joints. See Section , Significance and Use, for limitations when using this specification to evaluate industrially manufactured finger joints. Note 1This specification supersedes the finger-joint portion of the 1990 edition of Specification D 3110.

1.2 The following index is provided as a guide to the test methods in this specification:

SectionApparatusEquipment, Material, and Preparation of Assemblies and SpecimensConditioning for Factory-Manufactured Assemblies, Laboratory-Made Assemblies, and Test SpecimensTesting in FlexureTesting in TensionExposure Conditions and Treatments1.Dry Use Tests: Dry, 3-cycle Soak, Elevated Temperature, and Temperature-Humidity2.Wet Use Tests: Dry, Boil, Elevated Temperature, and Vacuum-Pressure
Note 2

The conditioning needed for various stages in the preparation of both types of specimens and for the exposure tests are given.

Note 3

Specific guidelines for specimen size, exposure conditions, testing, calculation, and reporting are given for flexure specimens in Sections and , and for tension specimens in Sections and .

1.3 For the definitions of dry useand wet use, see and .

1.4 The values stated in inch-pound units are to be regarded as standard. The SI units given in parentheses are for information only.

The following precautionary caveat pertains only to the apparatus and test methods portions, Sections of this specification: This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

Details

ICS-code 83.180
Engelse titel Standard Specification for Adhesives Used for Finger Joints in Nonstructural Lumber Products
Vervangen door

Winkelwagen

Subtotaal:

Ga naar winkelwagen