Norm

ASTM D5617-04(2015)

Standard Test Method for Multi-Axial Tension Test for Geosynthetics

54,27

Over deze norm

Status Definitief
Aantal pagina's 5
Commissie D35.10
Gepubliceerd op 01-05-2015
Taal Engels

1.1 This test method covers the measurement of the out-of-plane response of geosynthetics to a force that is applied perpendicular to the initial plane of the sample.

1.2 When the geosynthetic deforms to a prescribed geometric shape (arc of a sphere or ellipsoid) formulations are provided to convert the test data to biaxial tensile stress-strain values. These formulations cannot be used for other geometric shapes. With other geometric shapes, comparative data on deformation versus pressure is obtained.

1.3 This test method is more commonly used to test geomembranes. Permeable materials may also be tested in conjunction with an impermeable material.

1.4 This test method requires a large diameter pressure vessel (600 mm). Information obtained from this test method may be more appropriate for design purposes than many small scale index tests such as Test Method D6693 or Test Method D7003/D7003M.

1.5 The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard.

1.6 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

Details

ICS-code 59.080.70
Nederlandse titel Standard Test Method for Multi-Axial Tension Test for Geosynthetics
Engelse titel Standard Test Method for Multi-Axial Tension Test for Geosynthetics

Winkelwagen

Subtotaal:

Ga naar winkelwagen