Norm

ASTM D5910-05(2012)

Standard Test Method for Determination of Free Formaldehyde in Emulsion Polymers by Liquid Chromatography

54,27

Over deze norm

Status Definitief
Aantal pagina's 6
Commissie D01.33
Gepubliceerd op 01-11-2012
Taal Engels

1.1 This test method is used for the determination of free formaldehyde (HCHO) in emulsion polymers without upsetting existing formaldehyde equilibria. The procedure has been evaluated using acrylic, acrylonitrile-butadiene, carboxylated styrene-butadiene and polyvinyl acetate emulsion polymers. This test method may also be applicable for emulsion polymers of other compositions. The established working range of this test method is from 0.05 to 15 ppm formaldehyde. Emulsion polymers must be diluted to meet the working range.

1.2 This test method minimizes changes in free formaldehyde concentration that can result from changes in the physical or chemical properties of an emulsion polymer.

1.3 There are no known limitations to this test method when used in the manner described. The emulsion polymer test specimen must be prepared with a diluent that has a pH similar to that of the emulsion. Use of an inappropriate pH may upset formaldehyde equilibria and result in incorrect formaldehyde levels.

1.4 The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard.

1.5 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

Details

ICS-code 71.040.50
Nederlandse titel Standard Test Method for Determination of Free Formaldehyde in Emulsion Polymers by Liquid Chromatography
Engelse titel Standard Test Method for Determination of Free Formaldehyde in Emulsion Polymers by Liquid Chromatography

Winkelwagen

Subtotaal:

Ga naar winkelwagen