Norm

ASTM D6940-10

Standard Practice for Measuring Sifting Segregation Tendencies of Bulk Solids

54,27

Over deze norm

Status Definitief
Aantal pagina's 5
Commissie D18.24
Gepubliceerd op 01-07-2010
Taal Engels

1.1 This practice covers an apparatus and procedure for simulating the segregation tendencies of bulk solids by means of the sifting mechanism.

1.2 Temperature- and humidity-sensitive bulk solids may need to be tested at different temperatures and moisture contents, as would happen in an industrial environment.

1.3 The maximum particle size should be limited to 3 mm, to reduce the likelihood of binding the slide gate.

1.4 This standard is not applicable to all bulk solids and segregation mechanisms: while sifting is a common segregation mechanism experienced by many bulk solids, other segregation mechanisms not evaluated by this standard might induce segregation in practice. Practice D6941 covers another common mechanism: fluidization.

1.5 The extent to which segregation will occur in an industrial situation is not only a function of the bulk solid and its tendency to segregate, but also the handling equipment (for example, bin design), process (for example, transfer rates), and environment.

1.6 The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard.

1.7 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

Details

ICS-code 19.120
Nederlandse titel Standard Practice for Measuring Sifting Segregation Tendencies of Bulk Solids
Engelse titel Standard Practice for Measuring Sifting Segregation Tendencies of Bulk Solids

Winkelwagen

Subtotaal:

Ga naar winkelwagen