Norm

ASTM D7524-10(2015)

Standard Test Method for Determination of Static Dissipater Additives (SDA) in Aviation Turbine Fuel and Middle Distillate Fuels—High Performance Liquid Chromatograph (HPLC) Method

54,27

Over deze norm

Status Definitief
Aantal pagina's 6
Commissie D02.04.0C
Gepubliceerd op 01-04-2015
Taal Engels

1.1 This test method covers the determination of static dissipater additive (SDA) content of aviation turbine fuel and middle distillate fuels.

1.2 The precision of this test method has been established for aviation turbine fuel over the concentration range of 1 mg/L to 12 mg/L. Higher concentrations can be determined by dilution, but the precision of the test method will not apply.

Note 1: The SDA used to develop this test method was STADIS 4502 for aviation fuels and STADIS 450 and 4252 for middle distillates.

1.3 The test method includes a procedure to concentrate the sulfonic acid component in the SDA prior to analysis.

1.4 The test method only applies to SDAs that contain alkyl substituted sulfonic acid.

1.5 The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard.

1.6 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

Details

ICS-code 75.160.20
Nederlandse titel Standard Test Method for Determination of Static Dissipater Additives (SDA) in Aviation Turbine Fuel and Middle Distillate Fuels—High Performance Liquid Chromatograph (HPLC) Method
Engelse titel Standard Test Method for Determination of Static Dissipater Additives (SDA) in Aviation Turbine Fuel and Middle Distillate Fuels—High Performance Liquid Chromatograph (HPLC) Method

Winkelwagen

Subtotaal:

Ga naar winkelwagen