Norm

ASTM D7660-10

Standard Guide for Conducting Internal Pressure Tests on United Nations (UN) Packagings

54,27

Over deze norm

Status Definitief
Aantal pagina's 7
Commissie D10.21
Gepubliceerd op 15-08-2010
Taal Engels

1.1 This guide is intended to provide a standardized method and a set of basic instructions for performing internal and hydrostatic pressure testing on packaging designs.

1.2 This guide provides information to help clarify various terms used as part of the United Nations (UN) certification process that may assist in determining the applicable test.

1.3 This guide provides the suggested minimum information that should be documented when conducting pressure testing.

1.4 This guide provides information for recommended equipment and fittings for conducting pressure tests.

1.5 This guide is based on the current information contained in 49 CFR, §173.27 and §178.605.

1.6 When testing packaging designs intended for hazardous materials (dangerous goods), the user of this guide shall be trained in accordance with 49 CFR §172.700 and other applicable hazardous materials regulations such as the ICAO Technical Instructions, IMDG Code, and carrier rules such as the IATA Dangerous Goods Regulations.

1.7 The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard.

1.8 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

Details

ICS-code 55.040
Nederlandse titel Standard Guide for Conducting Internal Pressure Tests on United Nations (UN) Packagings
Engelse titel Standard Guide for Conducting Internal Pressure Tests on United Nations (UN) Packagings

Winkelwagen

Subtotaal:

Ga naar winkelwagen