ASTM D800 - 05(2014) en

Standard Test Methods of Chemical Analysis of Industrial Metal Cleaning Compositions

58,09 70,29 Incl BTW

Over deze norm

Status Definitief
Aantal pagina's 12
Gepubliceerd op 01-01-2014
Taal Engels

1.1 These test methods describe the procedures for the chemical analysis of industrial metal cleaning compositions in solid, paste, or liquid form. These cleaning compositions may contain caustic alkalies, silicates, phosphates, chromates, carbonates, bicarbonates, borates, sulfates, sulfites, nitrates, chlorides, soaps, rosin, sulfonated wetting agents, anti-foaming agents, organic bases, organic solvents, organic coupling agents, and sometimes inorganic acid salts or organic acids. Occasionally, such cleaning compositions may contain sulfonated oils; in such cases, reference should be made to Method D500. The examination under a low power microscope or magnifying glass, supplemented by a few qualitative tests, will often indicate the number of components and their identity.

1.2 The analytical methods appear in the following order:




Preparation of Sample


Total Alkalinity as Na2O

5 – 8

Total Fatty Acids (and Rosin)

9 and 10

Na2O Combined with Fatty Acids (and Rosin)

11 and 12

Anhydrous Soap


—Rosin (McNicoll Test Method):



14 and 15


16 – 19

Total Silica Calculated as SiO2

20 – 23




24 and 25


26 – 18

Combined Sodium and Potassium Oxides

34 – 37


38 – 40


41 – 43

Water, Distillation Test Method

44 – 47

Carbon Dioxide by Evolution-Absorption Test Method

48 – 52

Loss at 105°C

53 and 54

Total Matter Insoluble in Alcohol

55 – 57

Free Alkali

58 – 60

Synthetic Detergent or Wetting Agent

61 and 62

Volatile Hydrocarbons

63 – 67

Loss on Ignition

68 and 69


70 and 71

1.3 The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard.

1.4 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use. Material Safety Data Sheets are available for reagents and materials. Review them for hazards prior to usage. See 6.1 for a specific hazards statement.


Engelse titel Standard Test Methods of Chemical Analysis of Industrial Metal Cleaning Compositions



Ga naar winkelwagen