Norm

ASTM D858 - 07 en

Standard Test Methods for Manganese in Water

  • Deze norm is ingetrokken sinds 01-09-2012

50,60 61,23 Incl BTW

Over deze norm

Status Ingetrokken
Aantal pagina's 8
Gepubliceerd op 01-08-2007
Taal Engels

1.1 These test methods cover the atomic absorption determination of dissolved and total recoverable manganese in water and certain wastewaters. Three test methods are given as follows:

Test Method Concentration RangeSections
A-Atomic Absorption, Direct 0.1 to 5 mg/L7 to 15
B-Atomic Absorption, Chelation-Extraction 10 to 500 g/L16 to 24
C-Atomic Absorption, Graphite Furnace 5 to 50 g/L25 to 33

1.2 Test Methods A, B, and C were used successfully on reagent grade and natural waters. Other matrices used in the study were brine (Test Method B), effluent from a wood treatment plant, and condensate from a medium BTU coal gasification process (Test Method C). It is the user''s responsibility to ensure the validity of a test method for waters of untested matrices.

This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use. For specific hazard statements, see 11.7, 20.2, 20.9, and 22.10.

1.3 Former Test Method A (Colorimetric) was discontinued. For historical information, see Appendix X1.

Details

ICS-code 13.060.50
Engelse titel Standard Test Methods for Manganese in Water
Vervangen door

Winkelwagen

Subtotaal:

Ga naar winkelwagen