Norm

ASTM E1066 - 95(2006) en

Standard Test Method for Ammonia Colorimetric Leak Testing

  • Deze norm is ingetrokken sinds 15-06-2012

50,60 61,23 Incl BTW

Over deze norm

Status Ingetrokken
Aantal pagina's 5
Gepubliceerd op 01-12-2006
Taal Engels

1.1 This test method covers the testing of large single- and double-walled tanks, pressure and vacuum vessels, laminated, lined- or double-walled parts, complex piping systems, flexible containers (such as aircraft fuel tanks), glass-to-metal seals in hybrid packages, and systems that inherently contain or will contain ammonia (such as large tonnage refrigeration systems and fertilizer storage systems).

1.2 This method can be used on piping, valves and containers with welded, fitted, or laminated sections that can be sealed at their ends or between their outer and inner walls and that are designed for internal pressures of 34.5 kPa (5 psig) or greater.

1.3 Basic procedures are described based on the type of inspection used. These procedures should be limited to finding leakage indications of 4.5 x 10-12 mol/s (1 x 10-7 Std cm 3/s) or larger.

This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use. (For more specific safety precautionary information see 7.4, 8.2, 9.4.1, and ) 103.1.

Details

ICS-code 17.180.20
Engelse titel Standard Test Method for Ammonia Colorimetric Leak Testing
Vervangen door

Winkelwagen

Subtotaal:

Ga naar winkelwagen