Norm

ASTM E1297-08(2013)

Standard Test Method for Measuring Fast-Neutron Reaction Rates by Radioactivation of Niobium

54,27

Over deze norm

Status Definitief
Aantal pagina's 6
Commissie E10.05
Gepubliceerd op 01-01-2013
Taal Engels

1.1 This test method describes procedures for measuring reaction rates by the activation reaction 93Nb(n,n) 93mNb.

1.2 This activation reaction is useful for monitoring neutrons with energies above approximately 0.5 MeV and for irradiation times up to about 30 years.

1.3 With suitable techniques, fast-neutron reaction rates for neutrons with energy distribution similar to fission neutrons can be determined in fast-neutron fluences above about 1016 cm−2. In the presence of high thermal-neutron fluence rates (>1012cm−2·s−1), the transmutation of 93mNb due to neutron capture should be investigated. In the presence of high-energy neutron spectra such as are associated with fusion and spallation sources, the transmutation of 93mNb by reactions such as (n,2n) may occur and should be investigated.

1.4 Procedures for other fast-neutron monitors are referenced in Practice E261.

1.5 Fast-neutron fluence rates can be determined from the reaction rates provided that the appropriate cross section information is available to meet the accuracy requirements.

1.6 The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard.

1.7 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

Details

ICS-code 27.120.01
Nederlandse titel Standard Test Method for Measuring Fast-Neutron Reaction Rates by Radioactivation of Niobium
Engelse titel Standard Test Method for Measuring Fast-Neutron Reaction Rates by Radioactivation of Niobium

Winkelwagen

Subtotaal:

Ga naar winkelwagen