Norm

ASTM E1611-00(2013)

Standard Guide for Conducting Sediment Toxicity Tests with Polychaetous Annelids

78,39

Over deze norm

Status Definitief
Aantal pagina's 26
Commissie E50.47
Gepubliceerd op 01-03-2013
Taal Engels

1.1 This guide covers procedures for obtaining laboratory data concerning the adverse effects of potentially contaminated sediment, or of a test material added experimentally to contaminated or uncontaminated sediment, on marine or estuarine infaunal polychaetes during 10-day or 20 to 28-day exposures. These procedures are useful for testing the effects of various geochemical characteristics of sediments on marine and estuarine polychaetes and could be used to assess sediment toxicity to other infaunal taxa, although modifications of the procedures appropriate to the test species might be necessary. Procedures for the 10-day static test are described for Neanthes arenaceodentata and Neanthes virens and for the 20 to 28-day static-renewal sediment toxicity for N. arenaceodentata.

1.2 Modifications of these procedures might be appropriate for other sediment toxicity test procedures, such as flow-through or partial life-cycle tests. The methods outlined in this guide should also be useful for conducting sediment toxicity tests with other aquatic taxa, although modifications might be necessary. Other test organisms might include other species of polychaetes, crustaceans, and bivalves.

1.3 Other modifications of these procedures might be appropriate for special needs or circumstances. Although using appropriate procedures is more important than following prescribed procedures, the results of tests conducted using unusual procedures are not likely to be comparable to those of many other tests. Comparisons of the results obtained using modified and unmodified versions of these procedures might provide useful information concerning new concepts and procedures for conducting sediment tests with infaunal organisms.

1.4 These procedures are applicable to sediments contaminated with most chemicals, either individually or in formulations, commercial products, and known or unknown mixtures. These procedures can be used with appropriate modifications to conduct sediment toxicity tests on factors such as temperature, salinity, dissolved oxygen (DO), and natural sediment characteristics (for example, particle size distribution, organic carbon content, and total solids). These procedures can also be used to conduct bioconcentration tests and in situ tests, and to assess the toxicity of potentially contaminated field sediments, or of materials such as sewage sludge, oils, particulate matter, and solutions of toxicants added to sediments. A median lethal concentration (LC50) or median sublethal effect concentration (EC50) of toxicants or of highly contaminated sediment mixed into uncontaminated sediment can be determined. Materials adhering to sediment particles or dissolved in interstitial water can be tested.

1.5 The results of 10-day toxicity tests with contaminated sediments can be reported as a LC50 if a series of concentrations is tested or as a percent mortality relative to a control or reference sediment. The results of 20 to 28-day toxicity tests with contaminated sediments can be reported as a LC50 if a series of concentrations is tested or as a percent mortality or growth relative to a control or reference sediment.

1.6 This guide is arranged as follows:

 

Section

Referenced Documents

 2

Terminology

 3

Summary of Guide

 4

Significance and Use

 5

Interferences

 6

Apparatus

 7

 Facilities

 7.1

 Construction Materials

 7.2

 Test Chambers

 7.3

 Cleaning

 7.4

 Acceptability

 7.5

Hazards

 8

Test Water

 9

 General Requirements

 9.1

 Source

 9.2

 Preparation

 9.3

 Characterization

 9.4

Test and Control Sediments

10

 General

10.1

 Characterization

10.2

 Control Sediment

10.3

 Field-Collected Test Sediment

10.4

 Reference Sediment

10.5

 Laboratory-Spiked Test Sediment

10.6

 Test Concentration(s)

10.7

 Addition of Toxicant to Sediment

10.8

Test Organisms

11

  Species

11.1

  Age

11.2

  Feeding

11.3

  Source

11.4

  Collection and Handling

11.5

  Quality

11.6

 Experimental Design

12

  Controls

12.2

  Field Survey Design

12.3

  Laboratory Experiments

12.4

 Procedure

13

  Dissolved Oxygen

13.1

  Temperature

13.2

  Salinity

13.3

  Light

13.4

  Feeding

13.5

  Beginning of Test

13.6

  Duration of Test

13.7

  Biological Data

13.8

  Other Measurements

13.9

 Analytical Methodology

14

 Acceptability of Test

15

 Interpretation of Results

16

 Report

17

 Keywords

18

 Annexes

 

  Neanthes arenaceodentata

Annex A1

  Neanthes virens

Annex A2


1.7 The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard.

1.8 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use. Specific hazards statements are given in Section 8.

Details

ICS-code 13.060.70
Nederlandse titel Standard Guide for Conducting Sediment Toxicity Tests with Polychaetous Annelids
Engelse titel Standard Guide for Conducting Sediment Toxicity Tests with Polychaetous Annelids

Winkelwagen

Subtotaal:

Ga naar winkelwagen