Norm

ASTM E2875/E2875M-12

Standard Guide for Personal Protective Equipment for the Handling of Flat Glass

54,27

Over deze norm

Status Definitief
Aantal pagina's 5
Commissie E34.10
Gepubliceerd op 01-04-2012
Taal Engels

1.1 This guide covers the minimum requirements for proper personal protective equipment (PPE) for the safe handling of flat glass.

1.2 PurposeWhen engineering, administrative, and work practice controls are not feasible, the remaining hazard must be controlled with personal protective equipment (PPE). This guide will provide direction on what PPE should be utilized. Following this guidance will help to minimize the possibility or severity of injuries or both to personnel while working with or in the vicinity of flat glass.

1.3 Nothing in this guide shall be interpreted as requiring any action that violates any statute or requirement of any federal, state, or other regulatory agency.

1.4 This guide may be used by employers and employees. The required PPE shall be evaluated on a regular basis to determine suitability.

1.5 UnitsThe values stated in either SI units or inch-pound units are to be regarded separately as standard. The values stated in each system may not be exact equivalents; therefore, each system shall be used independently of the other. Combining values from the two systems may result in nonconformance with the standard.

1.6 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

Details

ICS-code 13.340.10
81.100
Nederlandse titel Standard Guide for Personal Protective Equipment for the Handling of Flat Glass
Engelse titel Standard Guide for Personal Protective Equipment for the Handling of Flat Glass

Winkelwagen

Subtotaal:

Ga naar winkelwagen