Norm

ASTM E346 - 08 en

Standard Test Method for Analysis of Methanol

  • Deze norm is ingetrokken sinds 15-12-2008

57,20 69,21 Incl BTW

Over deze norm

Status Ingetrokken
Aantal pagina's 12
Gepubliceerd op 15-12-2008
Taal Engels

1.1 These test methods cover chemical and physical tests for measuring the quality of methanol and appear in the following order:

Sections
Purity of Reagents4
Safety Precautions5
Sampling6
Acidity7 to 9
Carbonizables10 to 18
Color19 to 21
Distillation Range22 to 24
Permanganate Time25 to 27
Specific Gravity28 to 30
Water31 to 33
Water Miscibility34 to 37
Ethanol37 to 47
Acetone48 to 55
Trimethylamine56 to 65

1.2 The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard.

1.3 Review the current Material Safety Data Sheets (MSDS) for detailed information concerning toxicity, first aid procedures and safety precautions for the chemicals used in this standard.

1.4 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use. Specific hazards statements are given in Sections 5 and 15 and in 16.1, 16.4, and 52.2.2.

10.1 This test method describes a procedure for detecting the presence of impurities in methanol that carbonize or darken in the presence of concentrated sulfuric acid. The test method is applicable to methanol having a carbonizables content in the range from 0 to 70 on the platinum-cobalt scale (see Test Method D 1209).

37.1 This test method is applicable to methanol in which the ethanol content is between 0 and 1000 μg/g.

48.1 This test method covers a procedure for detecting the presence of acetone in methyl alcohol (methanol) in amounts greater than 0.003 weight % mass (m/m) .

56.1 This test method is used to determine the trimethylamine (TMA) content of refined methanol in the range of 10 to 100 μg/kg.

56.2 The odor of methanol has been determined to be caused primarily by the impurity TMA. The determination of TMA and its relationship to odor will eliminate the need to sniff methanol to determined odor, avoiding exposure to this toxic chemical. Although TMA has been identified as the principal cause of odor, other compounds (amines, ethers) may contribute to odor.

Details

ICS-code 71.080.60
Engelse titel Standard Test Method for Analysis of Methanol
Vervangen door

Winkelwagen

Subtotaal:

Ga naar winkelwagen