Norm

ASTM E353-14

Standard Test Methods for Chemical Analysis of Stainless, Heat-Resisting, Maraging, and Other Similar Chromium-Nickel-Iron Alloys

86,84

Over deze norm

Status Definitief
Aantal pagina's 44
Commissie E01.01
Gepubliceerd op 15-09-2014
Taal Engels

1.1 These test methods cover the chemical analysis of stainless, heat-resisting, maraging, and other similar chromium-nickel-iron alloys having chemical compositions within the following limits:

 

 Element

Composition Range, %

 

Aluminum

 

0.002

to  5.50

 

Boron

 

0.001

to  0.20

 

Carbon

 

0.01

to  1.50

 

Chromium

 

0.01

to 35.00

 

Cobalt

 

0.01

to 15.00

 

Niobium

 

0.01

to  4.00

 

Copper

 

0.01

to  5.00

 

Lead

 

0.001

to  0.50

 

Manganese

 

0.01

to 20.00

 

Molybdenum

 

0.01

to  7.00

 

Nickel

 

0.01

to 48.00

 

Nitrogen

 

0.001

to  0.50

 

Phosphorus

 

0.002

to  0.35

 

Selenium

 

0.01

to  0.50

 

Silicon

 

0.01

to  4.00

 

Sulfur

 

0.002

to  0.50

 

Tantalum

 

0.01

to  0.80

 

Tin

 

0.001

to  0.05

 

Titanium

 

0.01

to  4.50

 

Tungsten

 

0.01

to  4.50

 

Vanadium

 

0.005

to  1.00

 

Zirconium

 

0.001

to  0.20

1.2 The test methods in this standard are contained in the sections indicated below:

 

Sections

Aluminum, Total, by the 8-Quinolinol Gravimetric Method (0.20 % to 7.00 %)

119

Aluminum, Total, by the 8-Quinolinol Spectrophotometric Method (0.003 % to 0.20 %)

71

Carbon, Total, by the Combustion–Thermal Conductivity Method

Discontinued

Carbon, Total, by the Combustion Gravimetric Method (0.05 % to 1.50 %)

Discontinued

Chromium by the Atomic Absorption Method (0.006 % to 1.00 %)

202

Chromium by the Peroxydisulfate Oxidation–Titration Method (0.10 % to 35.00 %)

212

Chromium by the Peroxydisulfate-Oxidation Titrimetric Method

Discontinued

Cobalt by the Ion-Exchange–Potentiometric Titration Method (2 % to 15 %)

53

Cobalt by the Nitroso-R-Salt Spectrophotometric Method (0.01 % to 5.0 %)

61

Copper by the Neocuproine Spectrophotometric Method (0.01 % to 5.00) %)

109

Copper by the Sulfide Precipitation-Electrodeposition Gravimetric Method (0.01 % to 5.00 %)

82

Lead by the Ion-Exchange-Atomic Absorption Method (0.001 % to 0.50 %)

127

Manganese by the Periodate Spectrophotometric Method (0.01 % to 5.00 %)

8

Molybdenum by the Ion Exchange–8-Hydroxyquinoline Gravimetric Method

242

Molybdenum by the Spectrophotometric Method (0.01 % to 1.50 %)

190

Nickel by the Dimethylglyoxime Gravimetric Method (0.1 % to 48.0 %)

172

Phosphorus by the Alkalimetric Method (0.02 % to 0.35 %)

164

Phosphorus by the Molybdenum Blue Spectrophotometric Method (0.002 % to 0.35 %)

18

Silicon by the Gravimetric Method (0.05 % to 4.00 %)

46

Sulfur by the Gravimetric Method

Discontinued

Sulfur by the Combustion-Iodate Titration Method (0.005 % to 0.5 %)

Discontinued

Sulfur by the Chromatographic Gravimetric Method

Discontinued

Tin by the Solvent Extraction–Atomic Absorption Method (0.002 % to 0.10 %)

180

Tin by the Sulfide-Iodometric Titration Method (0.01 % to 0.05 %)

90

Titanium, Total, by the Diantipyrylmethane Spectrophotometric Method (0.01 % to 0.35 %)

231

Vanadium by the Atomic Absorption Method (0.006 % to 0.15 %)

221

1.3 Test methods for the determination of carbon and sulfur not included in this standard can be found in Test Methods E1019.

1.4 Some of the composition ranges given in 1.1 are too broad to be covered by a single test method and therefore this standard contains multiple test methods for some elements. The user must select the proper test method by matching the information given in the Scope and Interference sections of each method with the composition of the alloy to be analyzed.

1.5 The values stated in SI units are to be regarded as standard.

1.6 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use. Specific hazards statements are given in Section 6 and in special “Warning” paragraphs throughout these test methods.

Details

ICS-code 77.040.30
Nederlandse titel Standard Test Methods for Chemical Analysis of Stainless, Heat-Resisting, Maraging, and Other Similar Chromium-Nickel-Iron Alloys
Engelse titel Standard Test Methods for Chemical Analysis of Stainless, Heat-Resisting, Maraging, and Other Similar Chromium-Nickel-Iron Alloys

Winkelwagen

Subtotaal:

Ga naar winkelwagen