Norm

ASTM F1642-12

Standard Test Method for Glazing and Glazing Systems Subject to Airblast Loadings

54,27

Over deze norm

Status Definitief
Aantal pagina's 8
Commissie F12.10
Gepubliceerd op 15-11-2012
Taal Engels

1.1 This test method sets forth procedures for the evaluation of hazards of glazing or glazing systems against airblast loadings. The specifying authority shall provide the airblast loading parameters.

1.2 The data obtained from testing under this method shall be used to determine the glazing or glazing system hazard rating using Specification F2912.

1.3 This test method allows for glazing to be tested and rated with or without framing systems.

1.4 This test method is designed to test and rate all glazing, glazing systems, and glazing retrofit systems including, but not limited to, those fabricated from glass, plastic, glass-clad plastics, laminated glass, glass/plastic glazing materials, and film-backed glass.

1.5 The values stated in SI units are to be regarded as the standard. Values given in parentheses are for information only. For conversion of quantities in various systems of measurements to SI units, see E699.

1.6 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use. See Section 7 for specific hazards statements.

Details

ICS-code 19.060
81.040.20
Nederlandse titel Standard Test Method for Glazing and Glazing Systems Subject to Airblast Loadings
Engelse titel Standard Test Method for Glazing and Glazing Systems Subject to Airblast Loadings

Winkelwagen

Subtotaal:

Ga naar winkelwagen