Norm

CEN/TS 15862:2012 en

Karakterising van afval - Verkorte uitloogproef - Eén-staps-proef voor monolitische materialen bij een vaste vloeistof tot oppervlakte verhouding (L/A) voor proefstukken met vastgestelde minimale afmetingen

52,00

Over deze norm

Status Definitief
Aantal pagina's 21
Commissie Uitloogkarakteristieken
Gepubliceerd op 01-07-2012
Taal Engels
This Technical Specification specifies a compliance test for routine testing providing information on the leaching of monolithic waste which can be obtained under the experimental conditions specified hereafter with a single batch leaching test at a specified liquid to surface area ratio (L/A) of 12 (cm3cm-2). It applies to test portion of monolithic waste of regular shape, with a minimum dimension of 40 mm in all directions, obtained e.g. by cutting, coring or moulding. This document is not applicable if the surface area of the test portion cannot be determined by simple geometrical means. This leaching test does not provide information by itself on dynamic leaching behaviour, as specified in EN 12920. It does not give information on equilibrium conditions. For specific situations or basic characterization, other tests are available in the toolbox of CEN/TC 292 "Characterization of waste". This document does not address issues related to health and safety. This document has been developed to determine the release of mainly inorganic constituents from wastes. It does not take into account the particular characteristics of organic constituents nor the consequences of microbiological processes in organic degradable wastes. The test procedure specified in this document produces an eluate which subsequently need to be characterized physically and chemically, according to appropriate standard methods. This leaching test does not provide information by itself on dynamic leaching behaviour, as specified in EN 12920. It does not give information on equilibrium conditions. For specific situations or basic characterization, other tests are available in the toolbox of CEN/TC 292 "Characterization of waste". This document does not address issues related to health and safety.

Details

ICS-code 13.030.01
13.030.10
Nederlandse titel Karakterising van afval - Verkorte uitloogproef - Eén-staps-proef voor monolitische materialen bij een vaste vloeistof tot oppervlakte verhouding (L/A) voor proefstukken met vastgestelde minimale afmetingen
Engelse titel Characterisation of waste - Compliance leaching test - One stage batch leaching test for monoliths at fixed liquid to surface area ratio (L/A) for test portions with fixed minimum dimensions

Winkelwagen

Subtotaal:

Ga naar winkelwagen