Over deze norm
This European Standard specifies requirements for the manufacture, performance and testing of electrically controlled panic exit systems operated by a horizontal bar as an initiating element, specifically designed for use in a panic situation.These systems consist of at least the following elements:electrical locking element for securing an panic exit door,initiating element for initiating the release of electrical locking element in order to exit,electrical controlling element for supplying, connecting and controlling electrical locking element and initiating element.This European standard does not cover mechanically operated exit devices containing electrical functions that are not related to the exit release function, for example, access control or monitoring functions. Such devices are generally within the scope of EN 1125 or EN 179, as appropriate.This European Standard does not cover any other element of a security system, other than those directly involved in the control of a panic exit.It does not specify any particular design of devices and only such dimensions as are required to satisfy the Essential Requirements of the CPD are specified.Panic exit systems covered by this European Standard are for use on hinged or pivoted door leaves only.The suitability of a panic exit system for use on fire/smoke door assemblies is determined by fire performance tests conducted in addition to the performance tests required by this European Standard. Annex B indicates additional requirements for these products.This European Standard does not cover electrically controlled emergency exit systems (see prEN 13637).
||Hang- en sluitwerk - Elektrisch gestuurde systemen voor vluchtdeursluitingen voor het gebruik van vluchtroutes - Eisen en beproevingsmethoden
||Building hardware - Electrically controlled panic exit systems for use on escape routes - Requirements and test methods
- 89/106/EEG, Bouwproducten