IEC 60204-1:2005 en;fr

Veiligheid van machines - Elektrische uitrusting van machines - Deel 1: Algemene eisen

Volledig inclusief:

  • Deze norm is ingetrokken sinds 04-03-2009

313,21 341,40 Incl BTW

Over deze norm

Status Ingetrokken
Aantal pagina's 243
Commissie Elektrische uitrusting van machines
Gepubliceerd op 01-10-2005
Taal Engels, Frans
This part of IEC 60204 applies to the application of electrical, electronic and programmable electronic equipment and systems to machines not portable by hand while working, including a group of machines working together in a co-ordinated manner. The equipment covered by this part of IEC 60204 commences at the point of connection of the supply to the electrical equipment of the machine (see 5.1). This part of IEC 60204 is applicable to the electrical equipment or parts of the electrical equipment that operate with nominal supply voltages not exceeding 1 000 V for alternating current (a.c.) and not exceeding 1 500 V for direct current (d.c.), and with nominal supply frequencies not exceeding 200 Hz. This part of IEC 60204 does not cover all the requirements (for example guarding, interlocking, or control) that are needed or required by other standards or regulations in order to protect persons from hazards other than electrical hazards. Each type of machine has unique requirements to be accommodated to provide adequate safety. This part specifically includes, but is not limited to, the electrical equipment of machines as defined in 3.35.


ICS-code 29.020
Nederlandse titel Veiligheid van machines - Elektrische uitrusting van machines - Deel 1: Algemene eisen
Engelse titel Safety of machinery - Electrical equipment of machinery - Part 1: General requirements
Vervangen door
Gewijzigd door



Ga naar winkelwagen