Norm

IEC 60695-11-10:1999+A1:2003 en;fr

Brandbaarheid van elektrotechnische producten - Deel 11-10: Beproevingsvlammen - Beproevingsmethoden voor horizontale en verticale 50 W-vlammen

  • Deze norm is ingetrokken sinds 24-05-2013

149,56

Over deze norm

Status Ingetrokken
Aantal pagina's 51
Commissie Kunststoffen
Gepubliceerd op 01-06-2003
Taal Engels, Frans
Specifies a small-scale laboratory screening procedure for comparing the relative burning behaviour of vertically or horizontally oriented specimens made from plastic and other non-metallic materials, exposed to a small-flame ignition source of 50 W nominal power. These test methods determine the linear burning rate and the afterflame/afterglow times, as well as the damaged lenght of specimens. Applicable to solid and cellular materials that have an apparent density of not less than 250 kg/m³, determined in accordance with ISO 845. They do not apply to materials that shrink away from applied flame without igniting: ISO 9773 should be used for thin flexible materials. The test methods described provide classification systems which may be used for quality assurance, or the pre-selection of component materials of products. May be used for the pre-selection of a material, providing positive results are obtained at a thickness equal to the smallest thickness used in the application. Has the status of a basic safety publication in accordance with Guide 104.

Details

ICS-code 13.220.40
29.020
Nederlandse titel Brandbaarheid van elektrotechnische producten - Deel 11-10: Beproevingsvlammen - Beproevingsmethoden voor horizontale en verticale 50 W-vlammen
Engelse titel Fire hazard testing - Part 11-10: Test flames - 50 W horizontal and vertical flame test methods
Vervangen door

Winkelwagen

Subtotaal:

Ga naar winkelwagen