IEC 60947-6-1:2005+A1:2013 en

Laagspanningsschakelaars - Deel 6-1: Meervoudige-functieschakelaars - Netomschakelaars


Over deze norm

Status Definitief
Aantal pagina's 186
Gepubliceerd op 01-12-2013
Taal Engels
This part of IEC 60947 applies to transfer switching equipment (TSE) to be used in power systems for transferring a load supply between a normal and an alternate source with a supply interruption during transfer, the rated voltage of which does not exceed 1000 V a.c. or 1500 V d.c. It covers: - manually operated transfer switching equipment (MTSE); - remotely operated transfer switching equipment (RTSE); - automatic transfer switching equipment (ATSE). It covers TSE provided with or without an enclosure. Devices necessary for the control (e.g. control switches, etc.) and the protection (e.g. circuitbreakers, etc.) of a TSE are covered by the relevant IEC standards. The object of this part of IEC 60947 is to state: 1) The characteristics of the equipment: 2) The conditions of the equipment with respect to: a) operation for which the equipment is intended; b) operation and behaviour in case of specified abnormal conditions, for example, shortcircuit; c) dielectric properties. 3) The tests intended to confirm that these conditions have been met and the methods for performing these tests. 4) The data to be marked on the equipment and provided by the manufacturer.


ICS-code 29.120.40
Nederlandse titel Laagspanningsschakelaars - Deel 6-1: Meervoudige-functieschakelaars - Netomschakelaars
Engelse titel Low-voltage switchgear and controlgear - Part 6-1: Multiple function equipment - Transfer switching equipment



Ga naar winkelwagen