Norm

IEC 61000-4-33:2005 en

Elektromagnetische compatibiliteit (EMC) - Beproeving en meettechnieken - Deel 4-33: Meetmethoden voor transiƫnt parameters met hoog vermogen

232,65

Over deze norm

Status Definitief
Aantal pagina's 69
Gepubliceerd op 01-09-2005
Taal Engels
This part of IEC 61000 provides a basic description of the methods and means (e.g., instrumentation) for measuring responses arising from highpower transient electromagnetic parameters. These responses can include: - the electric (E) and/or magnetic (H) fields (e.g., incident fields or incident plus scattered fields within a system under test); - the current I (e.g., induced by a transient field or within a system under test); - the voltage V (e.g., induced by a transient field or within a system under test); - the charge Q induced on a cable or other conductor. These measured quantities are generally complicated timedependent waveforms, which can be described approximately by several scalar parameters, or "observables". These parameters include: - the peak amplitude of the response, - the waveform risetime, - the waveform falltime (or duration), - the pulse width, and - mathematically defined norms obtained from the waveform. This International Standard provides information on the measurement of these waveforms and on the mathematical determination of the characterizing parameters. It does not provide information on specific level requirements for testing.

Details

ICS-code 33.100.10
33.100.20
Nederlandse titel Elektromagnetische compatibiliteit (EMC) - Beproeving en meettechnieken - Deel 4-33: Meetmethoden voor transiƫnt parameters met hoog vermogen
Engelse titel Electromagnetic compatibility (EMC) - Part 4-33: Testing and measurement techniques - Measurement methods for high-power transient parameters

Winkelwagen

Subtotaal:

Ga naar winkelwagen