Norm

IEC 61003-1:2016 en

Industriƫle regelsystemen - Instrumenten met analoge ingangen en twee- of meervoudige-toestands uitgangen - Deel 1: Methoden voor de bepaling van de prestatie

124,64

Over deze norm

Status Definitief
Aantal pagina's 49
Commissie Industrieel meten, regelen en automatiseren
Gepubliceerd op 01-06-2016
Taal Engels
IEC 61003-1 is applicable to pneumatic and electric industrial-process instruments or control device using measured values that are continuous signals either a mechanical (position, force, etc.) or a standard electric signal. These instruments or process control systems modules may be used as controllers or as switches for alarm and other similar purposes. Electronic product safety issues may impact only a few products covered by this document. Consequently this document does not address such safety issues. This standard is intended to specify uniform terminologies and testing methods for performance evaluation of industrial-process instruments or process control systems modules with analogue measured values and two- or multi-position outputs. Considerations other than the performances are listed in Clause 10.

Details

ICS-code 25.040.40
35.240.50
Nederlandse titel Industriƫle regelsystemen - Instrumenten met analoge ingangen en twee- of meervoudige-toestands uitgangen - Deel 1: Methoden voor de bepaling van de prestatie
Engelse titel Industrial-process control systems - Instruments with analogue inputs and two- or multi-position outputs - Part 1: Methods for evaluating performance
Vervangt

Winkelwagen

Subtotaal:

Ga naar winkelwagen