Norm

IEC 61535:2009+A1:2012 en

Toestelverbindingsstopcontacten bestemd voor vaste aansluiting in vaste installaties

249,27

Over deze norm

Status Definitief
Aantal pagina's 50
Commissie Elektrotechnisch installatiematerieel
Gepubliceerd op 01-05-2012
Taal Engels
This standard applies to two up to five wire installation couplers including earth, if provided, with a rated voltage up to and including 500 V a.c. and a rated connecting capacity up to and including 10 mm? for permanent connection in indoor electrical installations. Installation couplers with additional contacts for voltages other than mains voltages are outside the scope of this standard. An installation coupler consists of an installation female connector and an installation male connector for permanent connection not intended to be engaged or disengaged under load nor to be engaged or disengaged other than during first installation or during reconfiguration or maintenance of the wiring system in which installation couplers have been installed. This means that installation couplers are only intended for infrequent use. Installation couplers are not suitable for use in place of socket-outlet systems. Installation couplers are not suitable for use in place of devices for connecting luminaires (DCLs) according to IEC 61995 or luminaire supporting couplers (LSCs). In locations where special conditions prevail, as in ships, vehicles and the like and in hazardous locations, for example where explosions are liable to occur, special constructions may be required.

Details

ICS-code 29.120.99
Nederlandse titel Toestelverbindingsstopcontacten bestemd voor vaste aansluiting in vaste installaties
Engelse titel Installation couplers intended for permanent connection in fixed installations
Vervangt
Gewijzigd door

Winkelwagen

Subtotaal:

Ga naar winkelwagen