Norm

IEC 61810-2:2017 en

Elektromechanische elementaire relais - Deel 2: Betrouwbaarheid

199,42

Over deze norm

Status Definitief
Aantal pagina's 86
Gepubliceerd op 01-05-2017
Taal Engels
IEC 61810-2 covers test conditions and provisions for the evaluation of endurance tests using appropriate statistical methods to obtain reliability characteristics for relays. This document applies to electromechanical elementary relays considered as non-repaired items (i.e. items which are not repaired after failure). The lifetime of a relay is usually expressed in number of cycles (CTF). Therefore, whenever the terms “time” or “duration” are used in IEC 61649, they carry the meaning “cycles”. However, with a given frequency of operation, the number of cycles can be transformed into respective times (e.g. times to failure (TTF)). The failure criteria and the resulting characteristics of elementary relays describing their reliability in normal use are specified in this document. A relay failure occurs when the specified failure criteria are met. As the failure rate for elementary relays cannot be considered as constant, particularly due to wear-out mechanisms, the cycles to failure of tested items typically show a Weibull distribution. This document provides numerical and graphical methods to calculate approximate values for the two-parameter Weibull distribution, as well as lower confidence limits and a method for confirmation of reliability values with the WeiBayes method. This document does not cover procedures for electromechanical elementary relays where enhanced requirements for the verification of reliability apply.

Details

ICS-code 29.120.70
Nederlandse titel Elektromechanische elementaire relais - Deel 2: Betrouwbaarheid
Engelse titel Electromechanical elementary relays - Part 2: Reliability
Vervangt

Winkelwagen

Subtotaal:

Ga naar winkelwagen