Norm

IEC 62127-1:2007+A1:2013 en

Ultrasone technologie - Hydrofoons - Deel 1: Meetmethoden en karakterisering van medische ultrasone technologievelden tot 40 MHz

398,84

Over deze norm

Status Definitief
Aantal pagina's 90
Commissie Elektro-akoestiek en ultrageluid
Gepubliceerd op 01-02-2013
Taal Engels
This part of IEC 62127 specifies methods of use of calibrated hydrophones for the measurement in liquids of acoustic fields generated by ultrasonic medical equipment operating in the frequency range up to 40 MHz. The objectives of this standard are: - to define a group of acoustic parameters that can be measured on a physically sound basis; - to define a second group of parameters that can be derived under certain assumptions from these measurements, and called derived intensity parameters; - to define a measurement procedure that may be used for the determination of acoustic pressure parameters; - to define the conditions under which the measurements of acoustic parameters can be made in the frequency range up to 40 MHz using calibrated hydrophones; - to define procedures for correcting, for limitations caused by the use of hydrophones with finite bandwidth and finite active element size.

Details

ICS-code 11.040.50
17.140.50
Nederlandse titel Ultrasone technologie - Hydrofoons - Deel 1: Meetmethoden en karakterisering van medische ultrasone technologievelden tot 40 MHz
Engelse titel Ultrasonics - Hydrophones - Part 1: Measurement and characterization of medical ultrasonic fields up to 40 MHz
Vervangt

Winkelwagen

Subtotaal:

Ga naar winkelwagen