Over deze norm
IEC 62351-100-3, which is a technical specification, describes test cases of data andcommunication security for telecontrol equipment, Substation Automation Systems [SAS] andtelecontrol systems, including front-end functions of SCADA.The goal of this document is to enable interoperability by providing a standard method oftesting protocol implementations to verify that a device fulfils the requirement of IEC 62351-3.Note that conformity to IEC 62351-3 does not guarantee interoperability between devicesusing different implementations. It is expected that using this specification during testing willminimize the risk of non-interoperability. A basic condition for this interoperability is a passedconformance test of both devices.The scope of this document is the specification of common available procedures anddefinitions for conformance and/or interoperability testing to ensure conformity toIEC 62351-3. The conformance test cases defined here are focused to verify the conformantintegration of the underlying authentication/encryption protocol (TLS), as specified inIEC 62351-3, to protect TCP/IP based communications.This document is not intended to test the underlying authentication/encryption protocolrequired by IEC 62351-3 to be implemented over TCP/IP (TLS). The conformance testing ofthe authentication/encryption protocol over TCP/IP is outside the scope of this document.This document deals with data and communication security conformance testing; therefore,other requirements, such as safety or EMC are not covered. These requirements are coveredby other standards (if applicable) and the proof of compliance for these topics is doneaccording to these standards.
||Power systems management and associated information exchange - Data and communications security - Part 100-3: Conformance test cases for the IEC 62351-3, the secure communication extension for profiles including TCP/IP