Over deze norm
|Commissie||Laagspanningsschakelmaterieel en -systemen|
IEC/TS 63107 states requirements for integration and testing of IAMS in low-voltageswitchgear and controlgear assemblies - power switchgear and controlgear assembliesaccording to IEC 61439-1 and IEC 61439-2 (PSC-assemblies) to demonstrate their correctoperation.This document does not address personnel safety or damage to the PSC-assembly. Theserequirements are dealt with in IEC TR 61641 (see also 10.10.1). IAMS consist of IACDs and IARDs complying with their relevant product standard (e.g. opticalbased IACDs in accordance with IEC 60947-9-2, AQDs in accordance with IEC 60947-9-1 andSCPD’s in accordance with IEC 60947-2). For the reliable function in a PSC-assembly, theverification of correct operation of the complete system under built-in conditions is addressed.This document applies only to enclosed PSC-assemblies and deals with all requiredverifications needed for the integration in conjunction with IEC 61439-1 and IEC 61439-2.The test procedure given in this document takes into consideration:the correct function of the IAMS within the PSC-assembly;the prevention of unintended operation of the IAMS within the PSC-assembly;the functioning behaviour of the system immediately after the assembly is energised.Different tests under more severe conditions (e.g. doors in open position) can be performedwith an agreement between the user and the original manufacturer of the PSC-assembly.This document does not supersede any individual product standard. Individual devices arerequired to comply with their relevant standard.This document does not apply to integration of arc fault detection devices (AFDD) accordingto IEC 62606.The informative Annex II gives guidance on particular constructional requirements forincorporation of IAMS within a PSC-assembly.The informative Annex HH gives guidance for the user of PSC-assemblies about the criteria tobe considered when specifying a PSC-assembly with an integrated IAMS.
|Engelse titel||Integration of internal arc-fault mitigation systems in power switchgear and controlgear assemblies (PSC - Assemblies) according to IEC 61439-2|