Norm

ISO 10816-3:1998 en

Mechanical vibration - Evaluation of machine vibration by measurements on non-rotating parts - Part 3: Industrial machines with nominal power above 15 kW and nominal speeds between 120 r/min and 15000 r/min when measured in situ

  • Deze norm is ingetrokken sinds 24-02-2009

48,19

Over deze norm

Status Ingetrokken
Aantal pagina's 12
Gepubliceerd op 01-05-1998
Taal Engels
Apply to machine sets with, for instance, steam turbine or electrical drives, having a power above 15 kW and operating speeds between 120 r/min and 15000 r/min. The machine by this part of ISO 10816 include: - steam turbines with power up to 50 MW; - steam turbine sets with power greater than 50 MW and speeds below 1500 r/min or above 3600 r/min (not included in ISO 10816-2); - rotary compressors; - industrial gas turbines with power up to 3 MW; - pumps of centrifugal, mixed flow or axial flow type; - generators; - electrical motors of any type; - blowers or fans.

Details

ICS-code 17.160
Nederlandse titel Mechanical vibration - Evaluation of machine vibration by measurements on non-rotating parts - Part 3: Industrial machines with nominal power above 15 kW and nominal speeds between 120 r/min and 15000 r/min when measured in situ
Engelse titel Mechanical vibration - Evaluation of machine vibration by measurements on non-rotating parts - Part 3: Industrial machines with nominal power above 15 kW and nominal speeds between 120 r/min and 15000 r/min when measured in situ
Vervangen door

Winkelwagen

Subtotaal:

Ga naar winkelwagen