Norm

ISO 10896-2:2016 en

Terreintransportwerktuigen - Veiligheidseisen en verificatie - Deel 2: Zwenkende transportwerktuigen

131,28

Over deze norm

Status Definitief
Aantal pagina's 47
Commissie Mobiele transportwerktuigen
Gepubliceerd op 15-02-2016
Taal Engels
ISO 10896-2 specifies general safety requirements for slewing rough-terrain variable-reach trucks (hereafter known as “trucks”), consisting of a lower chassis with a slewing upper structure equipped with a telescopic lifting means (pivoted boom), on which a load handling device (e.g., carriage and fork arms) is typically fitted. Fork arms and other integrated attachments are considered to be parts of the truck. Other standards, in addition to the relevant provisions of this part of ISO 10896, can apply to the attachments. This part of ISO 10896 is not applicable to the following: a) rough terrain variable-reach trucks covered by ISO 10896-1 (non-slewing); b) industrial variable-reach trucks covered by ISO 3691-2; c) mobile cranes; d) machines designed primarily for earth-moving, such as loaders, even if their buckets are replaced by fork arms (see ISO 20474); e) trucks designed primarily with variable-length load suspension elements (e.g. chain, ropes) from which the load may swing freely in all directions;

Details

ICS-code 53.060
Nederlandse titel Terreintransportwerktuigen - Veiligheidseisen en verificatie - Deel 2: Zwenkende transportwerktuigen
Engelse titel Rough-terrain trucks - Safety requirements and verification - Part 2: Slewing trucks
Vervangt

Winkelwagen

Subtotaal:

Ga naar winkelwagen